Chosen Solution
I got this iPhone SE 2020 from a friend of mine for Data-Recovery after a liquid damage. First I got a short in the Power IC Chip at the center of the picture (APL1092). After changing this one, there seems to be another short on the board. This time I don’t know where to inject voltage, can someone help me with this line? (I marked the Diode-Mode-Shorting out Caps in the picture.)
Update (24.10.2021) The picture
I don’t want to be the bearer of bad news but these lines are the PP1V8_IO, PP_CPU_PCORE and PP_DCS_S1 circuits. I am not sure about the last two diode readings but the PP1V8_IQ should be around 0.24. I think you will find the short is under the CPU. This is common if too much heat is applied to the PMIC.
