Solved Remote Showing No Signal On My Recorder Panasonic Television

Chosen Solution

My recorder is showing No Signal, I think I have lent on the remote and changers something, it was working the just went to no signal. Update (08/13/2019) Hi It is a Panasonic HDD recorder MODLE NO dmr-hw220 , everything was working , I view the TV through the recorder, everything was working fine, I had the remote for recorder beside me, I think I lent on it as it started saying NO SIGNAL I am not sure what I must have pressed on the recorder remote. I have disconnected the remote and I am back to just watching TV I checked everything, the recorder is/was connected to the TV HDMI 1 , the recorder has power as it shows no signal when connected to the TV ( it has always been connected to TV , I can’t get the recorder to do anything other than the no signal. Janisaky

Hi @janisaky , The following is just a process of elimination to see what works and what doesn’t in an effort to find out where the problem may be Some things to try, ignore the ones that you’ve already tried. a). Have you tried powering off the recorder to see if this has reset it back to normal after it is switched back on? Switch off the recorder and then disconnect the power from the unit for about 1-2 minutes, reconnect the power and turn on the unit and check if it works OK. b). If possible, try connecting the recorder to the HDMI 2 input on the TV (ensure both the recorder and the TV are powered off before you move the cable) and after turning on both units (remember to alter the TV input to the HDMI 2 input) see if there is a signal from the recorder. This is just to prove if the HDMI 1 input was OK or not. If still no good, if possible connect another device using HDMI to the TV e.g. DVD player or camera with HDMI output and see if this works OK. This is just to prove that the HDMI function in the TV is still OK. c). Connect the recorder to the TV using an AV connection -user manual p.13 and check if you get signal. Remember to alter the TV input to the appropriate AV input. This is to prove that there is a signal output coming from the recorder.