Chosen Solution
I’m looking for a guide to remove and replace the radiator for my ‘94 Protege. If it helps, mine is the exact model in the picture above. I know I can find the radiator itself for under $50 brand new, but I’ve not done a replacement before and I have limited mechanical experience. Is this project feasible for someone who has built a computer from scratch?
@chialms sure it is. Computers and automobiles are different. One requires bigger tools and is a lot dirtier. It is actually pretty straight forward. Take a look at this removal process from the SM
You’ll need a metric socket set, wrenches and a few other tools like screwdrivers etc. Here is the part of the cooling system from the SM that should be of help to you cooling.pdfBiggest issue here is, do not let the antifreeze drain freely. It is toxic to animals and humans!!!
Water pumps aren’t that hard to replace. Start off with getting jack stands and a good Chilton’s manual. They have step by step instructions. But it’s basically drain your system. And undo the bolts that hold it in u might have to lift over other parts of the engine to get it out. When putting new one in not too much gasket sealeant or u could gum up new pump and tighten bolts to feet per pounds required and not too tight as you could crack your pump
