Posts

Chosen Solution Hi there, This is my first time here at this forum but I really need help and I’m hoping somebody in this world will help me get my phone out of its coma :) So the last September I got myself this used Z3 dual ( d6633 ) from a guy I know, The phone was in a descent condition, only changed the back cover and main flex cable as his previous owner stated at the time (which turned out to be a lie) , but after 3 days of using I noticed that the screen is a little bit out of the frame and I decided to open it up and put the double face adhesive in a different way under the screen in order to make it well glued to the phone....

Chosen Solution I wanted to ask what kind of power supply does a SMS use? AC/DC? 9-12V? Does Sega Mark III and SMS Model 1 & 2 have the same Power Supplies? Hi! The SMS 1 & 2 use the same PSU, a DC 9V/ 1A. From what I found online, the Mk. 3 uses the same power supply.

Chosen Solution I replaced the Lid Switch and verified it is working with my meter. I pressed the start button and the panel gave me the Lid Locked light and it locked the lid, plus started draining water that was still inside. I flip the fill knob so it would fill with water and it did, but it did not start to agitate the clothes. The next day I press the start button and can hear a click when the dial is set to spin or drain, but the green sensing light just flashes, I can also press start again and the sensing light will go solid, but no other lights and still nothing works....

Chosen Solution Hi, I have a rare problem. Normally i fix a short in just a few minutes. But on this board i have checked several times now, without any luck. I inject from 1 - 4.2A to the pads. Voltage down to around 0.9V, So heat should not be a problem? I use the rosin method, removed all shields and covered the WHOLE board. Can’t find any heated component at all....

Chosen Solution I have a early 2011 macbook pro, and I’ve been meaning to get an upgrade. I’m on a strict budget and I can only spend $100-140 dollars or less. Should I update my Ram to 8/16gb or get a 250GB SSD to replace my HD? I will only be using this computer for 3 more years so I don’t want to spend extensive money. Based on what I am using my computer for (below), what do you guys think I should do?...

Chosen Solution It looks like the whole problem was the main battery. I have finally received two new batteries and this computer is working well. The original battery appeared good from everything I could see. The LED indicators on the back showed all lights lit. The charger shows green. The coconut battery program shows everything looks good on the battery. However, when I tried to use this battery in a second computer, that computer exhibited the same symptoms as this computer....

Chosen Solution Hi , On Feb 5th 2019 I update the software(Android) , since then I lost sound on the apps such YouTube, Netflix etc… But, I do have system tone i.e. when I am at Home I move around between apps, guide, setting etc I do hear system sound but as soon as I launch any app NO SOUND When I connect my PS4 to tv I have sound, I guess thats the TV sound....

Chosen Solution Hello. I was recently cleaning my keyboard with some 70% isopropyl alcohol. As I was cleaning it with a cloth, a small amount of liquid leaked into the 8, i, and K keys. I would say that the amount leaked inside would be equivalent to 2 or 3 drops. I let the laptop dry for around 24 hours after the cleaning and I turned it back on. Soon after I started up the keyboard again, I noticed that the i key would input letters like ER....

Chosen Solution Spilled a little water on my laptop air keyboard. Immediately turned it over and dried it with a towel. Now it only works while plugged in but functions fine in every other way. Battery does not charge. Took it to Apple and after opening the were fairly certain it was just the IO board and flex cable so I left it there for a couple of days. They just called back saying it would need a new top case, battery and logic board....

Chosen Solution The spring in the Rollar Brush selector popped out when I took the bottom plates off for cleaning. I can’t figure out the exact placement for it and have found zero guides or answers online. Please help, Thank You This is not your exact model but may be your answer: http://www.repairclinic.com/RepairHelp/H…

Chosen Solution Hello, Do you have a 1 TB SSD disk and 2 x 4 GB memory modules and at what price? Sincerely, Flemming Your machine is a : Apple MacBook Pro “Core i7” 2.2 15" Early 2011 Specs Identifiers: Early 2011 15" - MC723LL/A - MacBookPro8,2 - A1286 - 2353-1* It came with: Standard RAM: 4 GB Maximum RAM: 16 GB* Details: 4 GB of RAM is installed as two 2 GB modules, no slots free....

Chosen Solution Start/Stop Button Not Working. All other button function. Can the start/stop button be replaced? @alistair , Alistair, Use the disassembly guide below to take your watch apart and clean the buttons perhaps if need be then you will have access to change buttons. Use a soft cloth or Qtip dampened with 90% Isopropyl Alcohol to clean around the buttons and contacts. Good luck. I hope this helped you out, if so let me know by pressing the helpful button....

Chosen Solution I have a 2012 Harley-Davidson Sportster Evolution. I have NO digital clock/screen, horn,indicators,rear back/brake lights, reg light I have engine start Turn key to ignition,it starts,turn key slightly back a couple of mills and everything comes back on. So between ACC-IGNITION.I have connection. I also have digital clock display stand down,when it is up. faulty ignition due to key vibration, buy after market round key ignition with 3 wires,Disconnect battery, splice into wiring loom, use electrical connectors to connect new wires into loom wires,If not get a electrical Mechanic to do it for you,Thats what i did cost £25to buy £20 to fit....

Chosen Solution One morning I tried to startup my Powerbook G4: I had used “startup sound control”, but this time i heard the startup sound and knew this was a bad sign. When I plug in the power adapter, the light is green at first an then goes orange. As I tried to start, I heard the sound of ejecting the CD (as usual) Then the startup sound, and then the screen goes grey… then nothing more happened… (by the way, the fan is working…) I tried to:...

Chosen Solution Hi Guys, help me please! This part fell out of my ps4 when tried to remove the plate with the heat sink. Solved it. Thanks anyway! This is a clip that is the “nut” for one of the cabinet screws. Look at the locations of all the screws and look for the corresponding “nut”. You will find one missing. Dan

Chosen Solution My parents had their dryer serviced on Monday and today when they were doing a load of laundry the Dryer was making a severe rattling noise when it was operating. There is nothing on top of the dryer so this baffles me. What can I do? Update (10/06/2018) Jeez, has it been a while. My parents were having a very hard time finding the invoice. Here it is and sorry it took so long!...

Chosen Solution Hi! I have a problem on my 2004 Jeep Grand Cherokee. the tail and license plate lights do not work, but the brake , directional back-up, and the hazard lights are working normally Can You please help me to fix. my problem and I also want to know where is the fuse of the tail lights THANKS! The fuse panel is located by the drivers left knee under the dash....

Chosen Solution it’s broken and I need help replacing it @issaihcarr a new connector will have to be soldered back on the board. Use these guides to get to the motherboard. You will have top remove it. Then post some pictures of what your damaged connector looks like. If it has broken of the board, you may have a tough time soldering it to traces. It will help if we see what you see....

Chosen Solution The rubber hand grip on the back or the camera where you normally put your thumb as come off. What is the kind of adhesive or glue you would use to re-attached that Hi There, I would suggest using a good quality double sided adhesive tape, this is what most manufacturers would use. If you don’t ever want it to come apart again, you can use an automotive weatherstrip adhesive....

Chosen Solution Need help eliminating the issue with pressure cleaner. I need to bypass micro switch in order to see if the automatic ss valve is the problem or the micro switch . Clear instructions on how l can bypass the micro switch .. Or any suggestions regarding why it’s triggering the powerboard Hi, Triggering the overload on a powerboard indicates that the unit is drawing too much power. If the micro switch that you are referring to is on the powerboard, it is there for your safety....