Posts

Chosen Solution My dog chewed off the foam handle. How can I find and replace it? steph24w , Did a search for replace foam grip for your stroller and had no luck. I had similar issue with my lawn mower handle where the foam grip had deteriorated. To repair it I went to the hardware store and bought a 6 foot length of foam pipe insulation $1.50, cut it to size to fit my handle(it already has a open seam) so I slid it on and then wrapped the foam with electrical tape to keep in place and reduced the size a bit for comfort....

Chosen Solution I have two original gen Kindle Fire’s that my daughter has been using. She has managed to pull out the headphone jack on both of them. (Four year olds can be a little rough.) Does anyone have experience with replacing these on the Kindle Fire? Unfortunately, the headphone jack is soldered to the logic board. You would have to replace the logic board, unless you’re great at microsoldering.

Chosen Solution I have lost one of the rubber feet. Is this part replaceable and do you have it?? These are for the earier model but may be what you need: http://www.welovemacs.com/mbp15rfeet.htm… Here’s an alternative: http://www.the-wabe.com/notebook/laptop-… If you go into an Apple Store they may just give you a couple but I haven’t seen a place to buy them yet.

Chosen Solution Hello all ! So this has happened a few time now, 3-4 to be exact ! Mac book is on and working as usual and then lines appear on the screen everywhere, and it shuts down. Then if I turn it on again I get the beeps x 3. Now I know this can be a Ram problem, and have already removed ram bars and switched them around powered up and it works all ok....

Chosen Solution So , we tried to replace the iphone screen because its very cracked. At first it turned on but looked glitchy but the touch screen didnt want to register. After that it just wouldn’t turn on. We checked everything and nothing was damaged. Put the old screen back on but no dice, still nothing. I have it plugged into the computer and ive tried hard rests and dfu. Itunes recognizes the device and i’m doing a reset/ restore but it still won’t turn on....

Chosen Solution I am replacing a damaged screen and pretty much completed the repair but when it came time to close up the phone it would not close flush on the right side near where the flex cable is. I closely inspected the clips and they line up exactly with the old clips. I tried looking at the frame to see if it was bent or warped anywhere and I didn’t see anything....

Chosen Solution Hi I have a Dell Inspiron 1564 laptop and I have a problem with the display not working. The external monitor works absolutely fine. History: I tried to change the Wireless card few months back as it was playing up, wireless card antenna is right above the lcd and the wire is fed through the same hing as the lcd screen wire. While replacing the wireless card antenna somehow I damaged the lcd screen wire and upon turning the laptop on the screen flickered right after the start up logo and laptop switched itself off....

Chosen Solution Kenmore Elite gas dryer. Showing LOC code. HELP PLEASE @divorcedhelp the “LOC” indicates the (Control Lock). This means the control panel has been locked and it will have to be unlocked before you can use the dryer. To unlock the control panel; press and release the Option and Select buttons at the same time.

Chosen Solution The slider to unlock my iphone 3G 16GB is not working. When trying to power off, the slider to shut down the iphone works but after reboot the slider to unlock doesn’t work. Update Replaced with glass & digitizer and it now works. However, I had sound issues where I could only hear calls through the speakerphone and not through the phone. After reading articles on the web, I will try pluggin in and unpluggin the head set to see if that works....

Chosen Solution So I have been seeing issues, I own a iPhone repair shop, and sometimes errors occur, and a flex able breaks on the front facing camera or a battary needs replacement. Will this cause issues with the iPhone? Or did iOS 11.0.3 solve this? Apple makes millions of dollars, so messed up how they’ve done this cause their so greedy. Safe to do. If you can obtain reliable parts....

Chosen Solution i have replaced the pulse sending unit 2 times and it works only sometimes why? Have you tried replacing the vss sensor (vehicle speed sensor)? It is located on the top part of the transmission. If you stand over the passenger side fender looking down into the engine bay you will see the intake, under that you will see the starter connected to the transmission. If you remove the intake arm from the intake manifold, and look straight down with a flash light you will see a sensor that is located on the transmission and held down by 2 10mm socket bolts....

Chosen Solution I have these lines across the screen. It doesn’t flicker and they can be seen more easily on solid colors. Any chance of bad connection or is my lcd really broken? Since the lines are steady, I don’t think it’s the gpu fault… Thanks in advance! Hook it up to an external monitor to help diagnose the issue. Let us know your results. If this shows up on the external monitor, take it into Apple or an ASP and request the video test for this issue to get Apple to give you a logic board fix for free: MacBook Pro Repair Extension Program for Video Issues https://www....

Chosen Solution Hi, I got a problem with iPhone 6. It keeps restarting automatically after 2 seconds. After that I try to upgrade to the new iOS and it works for 5 seconds and restart again. I leave it for a while then it automatic turn on and stuck in the white screen with Apple Logo. After that I never can turn my phone on again. I tried to connect to the computer and start it in DFU mode....

Chosen Solution Does anyone know if one could swap the upper case assembly of a 15” Retina MBP (early 2013) with an upper case assembly from a 15” Retina MBP (mid 2014)? They are listed as different parts! As you can see Apple did reuse the case across two models Mid 2012 & Early 2013 & then for the other Mid 2013 & 2014. I’ve never swapped the uppercases so it would be a gamble!...

Chosen Solution the display shows a moving circle only with screen dark since last twelve hours. the device also does not get switched off on pressing on-off button Press and hold the Power button and Home button for ~10 seconds to force a restart of your device. Sounds like you could have a damaged power button. But let’s try this first, even though it says it’s for an iPhone iPhone is unplugged from the socket or the computer....

Chosen Solution The machine won’t turn off, when it is done spinning it immediately starts filling again and goes through the cycle again and again. @barbeblom , Barb, sounds like a bad timer/control board allowing washer to keep cycling. Check the video below for more about a washer’s timer function. You could try a google search using your make and model #. If not comfortable working on your appliance, have a good repair Tech....

Chosen Solution I have a frigidaire stackable washer dryer with electrolux model number gleh26412fs1. The other day the motor board went out so after much diagnostic work bought another one. The drum now runs but only gives quarter turns rather then a full agitate or spin. Is the motor control board bad? I also notice that when the motor tries to run it is shocking to touch. I brushed my hand up to it and received a zing when I touched it....

Chosen Solution Hello, recently my friend gave me his old iPhone 5S to fix as it was old, but still worth salvaging. It needed a new screen and battery. Long story short, the battery went perfectly, but the screen is having issues. Everything works well on it. Touch ID, touch itself, front camera, ear speaker, etc. But, when the screen is installed/placed into the body of the phone, a slight yellow tint appears at the top....

Chosen Solution My in-laws gave me their iMac that got taken out when lighting hit the cable TV lines in their yard. Two cable boxes and the connected TVs are dead. The cable modem was dead. And the iMac that was connected directly to the cable modem doesn’t work. I don’t think any lighting energy traveled through the AC power lines into the house, just through the cable lines. So I’m working on the theory that the logic board absorbed a lot of energy from the modem....

Chosen Solution Hi, I can see that this machine and fans have been discussed many times on this forum I’ve looked through the Questions here on iFixit and elsewhere but can’t find a definitive answer to my problem. I have a 24-inch 2.8GHz C2D iMac Early 2008 Model. This machine has been wonderful since I’ve had it and I love it. About two months ago I noticed the Fans starting to get quicker and louder....