Chosen Solution The “System Interrupts” category in MS Resource Manager start to spike and the OS shuts down. I took the computer into the Geeks they say no harware issues but did detect a virus. They removed the virus, did an OS repair and gave the computer back. Two days after I got it back the Systems Interrupts spiked an Windows crashed. Windows re-started and no problem. “SIs” are running normal....
Chosen Solution I have accidentally cut the ribbon cable for my iPod Classic 4th Generation back light. What are my options? Can I fit a non-color display into this model of iPod Classic? I am impartial to the display’s color. @stonerissalty no you cannot. The displays are totally different and cannot be interchanged. you will have to get a display that is specific to your iPod. If it is a color display than that is what you have to replace it with....
Chosen Solution Is there anyway of repairing or replacing the bottom box of the plastic coil zipper of my Patagonia Nano Puff jacket? Can I do it or do I need to send it back for repairs? Hey David, You can’t repair the bottom box of the zipper. You will need to replace the whole zipper. You can follow the steps in the following guide to replace the zipper. The process will be slightly different due to the layers of the jacket....
Chosen Solution Hello guys. Cracked my screen yesterday on my Sony Xperia z5. My LCD is just fine, touch screen is not working properly, proximity sensor also freaks out and of course the glass is cracked. I wonder can I replace only glass and touch panel something like that: https://www.amazon.com/Sony-Xperia-Digit…. Or I need to buy a full LCD replacement? Also I’ve seen replacement videos on youtube but I don’t have a heater gun so can I somehow avoid this tool?...
Chosen Solution My son dropped his iPad mini cracking the screen. The iPad still worked fine, he used it that way for a month. It then started typing and changing apps by itself and just flipping out. I assumed it was because the screen was cracked so I got a new digitizer from ifixit. I replaced it carefully using the repair guide. When I powered it back up everything worked fine for a while, then It started doing the same thing again....
Chosen Solution Please help! My phone is in DFU mode and it keeps showing iTunes error 9. This is a belated answer so hopefully it can be of use to folks who search for and find this question. Error 9 on the iPhone 6 is either a NAND or CPU issue. Beyond the usual “update iTunes, try new cables and computers”, iTunes Error 9 can be either CPU or NAND related....
Chosen Solution Here is my orig. post With my 6s+ the battery went from 90% to 1% and restarted itself over and over, and then wouldn’t charge. I thought the battery was to blame so I replaced it. It worked good for a day and then its back to 1% and restarting. Now, its stuck in a boot loop were it will go between quickly flashing the backlight and flashing apple logo....
Chosen Solution I have a MacBook Air Mid-2013 (MacBookAir6,2 A1466) SSD with a 256GB SSD and also a MacBook Pro Retina 13" Mid-2014 (MacBookPro11,1 A1502) with 128GB SSD. I’d like to swap the two SSDs between the two machines. Apparently both machines have the newer PCIe-based SSDs and not the older SATA ones. Does this mean they are compatible (both form factor and interface/protocol)? I see no reason not to try....
Chosen Solution How to fix the control panel light on my microwave oven. @carlyn if you followed your user manual and your panel light does not work, don’t try a self repair. Since this is a brand new GE microwave contact the vendor and replace it. If it gives you already trouble with it being brand new, it will not get better as it ages.
Chosen Solution This question is not specific to any particular device, unless bits of fabric are devices. I ended up answering it myself in some ad hoc tests of various materials used to clean things, and wondering about a questions raised by my informal research. Introduction: In many instructions a lint-free cloth is specified, and the suggestion that a coffee filter can serve as the lint free cloth is included. There are two kinds of coffee filter: one is the flat-bottomed, ruffle-sided, typically white filter that was ubiquitous in the heyday of Mr....
Chosen Solution The right signal flashes OK,but the left flashes 2-3 times faster. Bad bulb,connection,or other electrical part? And depending on what it is,how do I get to it? Thanks for any help. the most probable cause of it flashing fast is that one of the bulbs on the left side needs to be replaced , check both front and rear bulbs on the side that is flashing fast My front passenger side turn bulb was out which caused the rapid flashing when the right indicator was on....
Chosen Solution I would like Hard Drive instructions for dell XPS 13.3 LX333 Thomas Parlow, take a lookon here. Should be the same as on your model. Hope this helps, good luck.
Chosen Solution Hey Guys, I have a Macbook Pro 3,1 (Late 2007 2.2Ghz Non-Unibody). The ‘Right Fan’ of the laptop is not working. The Left fan is running at around 5900 to 6100 under normal circumstances. I took the computer to Apple store (for an unrelated incident with my battery which was under warranty) and asked them to check the fan. They said the fan is not working and would cost $45 +Tax (Canadian) to get it fixed but they would have to order it and would take 3 - 5 days to get it fixed (I would be without any computer during that time)....
Chosen Solution Hey, I’m looking on an Samsung s2 (9100) that been dropped and after that it starts a few seconds then gives a message that something can’t load (? Don’t remember exactly) then it restarts and does the same all the time. The motherboard gets pritty hot in the upper area. Seen some that removed simcard and then could save all files and update it. I only trying to save all pictures....
Chosen Solution Long story short, wife dropped our Samsung TL220 on a hard wood floor. It powers on but the lens is stuck in the out position and won’t retract or do anything. Angel Cirilo, it is possible that the lens came of the guides. Try the ideas from here. Should that fail, you may have to replace the lens. Use this video to help you with that. Hope this helps, good luck....
Chosen Solution So my partner dropped her phone down the toilet and thous the device now has water damage. We done the usual, left it a good few days in a warm space in some rice and hey presto it came good other than a screen glitch and draining the battery. Now I’ve had a good few iPhone device apart in my time and replaced components but I was looking for suggestions before doing anything with the iPhone 6....
Chosen Solution my screen wont stay on for more than a few seconds, then it goes off. How do I keep it on longer? I will take this back and get a refund id I cant keep the screen to stay on longer Hi, Check the sleep timeout setting: Go to: Settings -> Device -> Display -> Sleep
Chosen Solution hello everyone, One of the screws on my iPhone back cover is stuck. He comes to the halves and he does nothing. What can I do with this? Thank you! Get a set of these screw extractors, I have a set and they have saved the day for me multiple times! Good luck! If you found this helpful, please up-vote or Accept Answer.
Chosen Solution Just recently my iPhone 6 stopped functioning. I had to buy a new screen after I spilled water on my iPhone and it didn’t turn on. I then did a reboot by holding skeep/wake button for 3 seconds then holding the home button. The apple logo showed up. I was able to use my iPhone, but I noticed a few things: one, the phone was sensitive, if I put it down on the table normally the screen would immediately turn purple and turn to look black, but if you looked closely it was just a really dark purple (occurred over the whole screen at the same time)....
Chosen Solution I just recently replaced the display and digitizer of an iPad mini and now have a large smudge where the screen and digitizer seem to touch, any fixes would be appreciated When reassembling an iPad, you have to be very careful about fingerprints on all three surfaces. Replacement parts usually come with a thin plastic cover so you should only remove them at the very end of the process....
