Posts

Chosen Solution Why is my reservoir refilling from the machine. It’ll draw water in and then a small amount will brew out with the most of the hot water returning to the reservoir through the intake or overflow. It’s as if a check valve is open. Paul, this is most commonly caused when the discharge tube backs up because of clogged lines, check valves or clogged needles. The water then comes out of the overflow tube back into the reservoir....

Chosen Solution How to Restore Apple Watch (v.3) & Remove Store Demo / Retail Mode? How to I access and use Genuine Apple Firmware? Where to get / make am Apple Restore Tool? Also any information for Apple Watch versions 0/1 and version 2 would be appreciated too. Thank you!. Apple Store & authorized resellers demo watches are locked down and Apple is the only ones which can clear the firmware....

Chosen Solution When I was taking apart my 5S, I accidentally ripped this connector: https://imgur.com/gallery/hsNI6 How will this affect the iPhone? So far I’ve reconnected everything and it seems to work fine. Check Wi-Fi 5 GHz and 2.4 GHz including 3G / 4G. It’s for one of those antenna cables and if I’m correct one of them won’t work properly or have very weak signal.

Chosen Solution So, I got a hand-me-down Samsung tablet from my grandma, the hardware is in good condition, and has only been through 2 people total before me. I initially turned it on once I first got it, and despite being a bit slow (fair since old tablet), it worked well. I then set it to factory reset, and plugged it in when I noticed the first issue of it not charging… The second issue showed up later when the reset should have finished… So I held down the power button to try to turn it on, but no response… I also unplugged the charger and plugged it back in, but absolutely nothing showed up… no sign of a charging screen or nothing… I have no idea what’s wrong, and I can’t tell if it’s a hardware issue or a software issue… I really hope it isn’t a BIOS issue… Can anyone please help me figure this out?...

Chosen Solution The screen cracked on my 47" Vizio LCD 1080p. I was wondering if there was a place where I could get another LCD panel to replace it myself. I live in Ohio. Thanks! Dustin, Michale Ku is about right with the price. First off, you can get a field tech service manual from here. Your panel part number is LC470WUH-SBR1 and it is available at this place for $358....

Chosen Solution Hi, so i got an macbook air 13" My problem is related to the lcd screen. When starting the mac the screen is either completely gray, white or has lines scattered around.I at first thought that the lcd might be broken. But if i apply pressure on a specific spot (pictures added at bottom) The screen comes back as normal. I did open the mac to see if the lcd flex cable was loose/took it out and checked that it was firmly seated....

Chosen Solution Could not detect an SD card message. Card works in other SD readers. Tried multiple SD cards and non can be detected. Tried cleaning the contacts and blowing out any dust or dirt without any success. I just fixed this issue on my son’s 3DS-XL Purchased in Dec 2014. He said that a message saying the “The SD Card couldn’t be recognized. Please end the game and start again....

Chosen Solution I got a micro sd card inserted it with the phone off. It won’t reconize it. If you have a Windows computer, attach the SD card to there, open file explorer, right click on it, select format, then click the file system type drop down menu, then select fat from the list, and hit start format. Put the SD card in your phone, and it should work. Hope this helps!...

Chosen Solution I have some weird issues. It works fine, it boots up and runs great, but the fan is constantly on full blast, its not blowing out hot air. When it first boots up the fans are quiet. When I try to shutdown or reboot the system it goes through all the steps of shutting down, but the screen stays black, wont ever reboot or shut down. I think I have reset the SMU on this model by unplugging everything, waited 10 seconds (or more) held the power button down while I plugged it in and then released the power button and powered it on, boots into OSX no problems or issues....

Chosen Solution I slammed the laptop shut and I have restarted and shut off/turned on. It works but is very slow. Is there anything I can do? You likely damaged the HD drive cable. This series has a problem where the cable can scrape the ruff milled body so slamming the lid transferred the energy though the drive to the cable under it (if the system was off) Apple knows of this problem and is replacing the drive cables for free....

Chosen Solution Hi, I recently tried to install a new screen in my iphone and during re-assembly a small gold clip about 5mm long dropped out, I have looked at all the 4s exploded views I can find and that part is never there. Also now flash sin’t working on camera and nor is wifi, anyone got any ideas why this is so? Any help would be greatly appreciated, as I now have a £500 phone in bits on my desk....

Chosen Solution But as of now i dont have any suppliers in stock due to covid, does anyone know anywhere else that stocks them? It’s available on Mobile Sentrix but you’ll need microsoldering equipment to do it. https://www.mobilesentrix.com/replacemen…

Chosen Solution Anyone know the temperature I should use for soldering the charge port on the motherboard? I purchased a soldering iron and it has a temperature control. I do not want it to be to hot as it will damage other parts and the board itself, then if it is to cold the solder connection will not hold. The temp dial goes from 200-450 °C Thanks 300°-350°C. If you are careful you won’t damage other parts near the charging connector....

Chosen Solution In the middle of a wash, I heard a rattling type noise from the washer. I opened the lid and all the water had drained, but the tub was not spinning. I checked the different cycles and noticed it won’t agitate either, but makes the same loud noise as it did in the spin cycle. Everything else seems to be working. I pull and checked the motor coupler. The part fit very loosely, as the rubber holes for the tabs were stretched, but nothing was broken....

Chosen Solution It is possible to install an second hd on the new 2014 Mac Mini? How difficult it is (if possible)? You’ll need to wait a bit until the world famous! IFIXIT Teardown team has a chance at tearing into one. Keep your eye on the main page here for the posting. I think by SSD, you are actually referring to PCIe-based flash storage. I too am curious if one goes with the PCI-e storage option, if a 2....

Chosen Solution Hi, I want add a SSD to M.2 slot in my IMAC for OS/application migration ,and use SATA 1TB for storage. But I dont know which SSD I must use. I search it so much without any complete answer for my question. for example can I use “ADATA Premier Pro SP900 M.2 2280 SSD” model in this IMAC? I’m very thankful for any help. You can only use the Apple mSata cards and they are very expensive....

Chosen Solution it hit an object and radiator is pushing into fan and other belts @anyplace , ryder, this usually takes specialized equipment like a frame rack with different pulling rams/arms along with measurement tools that tell when Rad cradle/ which your front mounts are attached are back in specification, the collision technician can also identify hidden damage you do not notice that could be a problem later. If cradle is too bad, it is removed and replaced with new or a good used cradle....

Chosen Solution My Samsung S6 is stuck in UPSM and I don’t get the “app info” logo and I only have limited access to settings. I think my problem started with a memory issue but now I cannot access files or my gallery to create more space…I have tried moving google now, as suggested elsewhere, but even do that. Any suggestions how to get disable UPSM or how to access my gallery?...

Chosen Solution Good morning, My wife has (had) a silver MacBook (the one with the removable battery) which she spilled a bit of water on. It does not start up anymore but the HD seems in tact, did not get wet. Would I be able to take her HD out of her normal MacBook and replace the HD in my 2010 MacBook Pro and then start it up as her machine?...

Chosen Solution So I have a iPhone 7 that I bought off a friend and she forgot her password for the actual phone and the iCloud. So I was wondering if I buy a new Logic board and use it to replace the old one. Will the phone be unlocked?Will the new Logic board come with the IOS installed?Will the network carrier change? Essentially you will be doing a brain transplant....