Posts

Chosen Solution If I replace my Pixel 3a USB-C connector because it’s crappy, can I get something with better quality, or will it be just the same? It will be the same….problem with the majority of devices that they make these days, is that they use surface mount components instead of board mount. The problem with surface mount is this; eventually the connections get loose and the whole thing becomes disconnected from the board from the stress of plugging and unplugging it over and over....

Chosen Solution I replaced the battery and Taptic Engine yesterday. I drained the phone till it powered itself off. Then I charged it overnight to 100%. Today it never dropped below 99%. Finally I decided something was wrong so I rebooted. Then it said it was at 55%. Shortly after that it rebooted and it continues to reboot. I pulled the phone apart again and inspected both connectors under a microscope but I don’t see any damage or indication they were improperly mated....

Chosen Solution A shift key on my M1 Macbook felt weird/sticky. I read a guide how to fix a key by taking it of and cleaning it. The taking of and cleaning part went fine, but I have problems placing the key back. I can’t find a guide that show how to do this for the shift key. The shift key seems to have two support bars that is different from the other keys....

Chosen Solution When connected through the surround sound through HDMI to my cable box the video on my tv flashes on and off then goes blank but there is still audio. The tv’s menu works fine when this occurs. Video works with all other inputs available on the surround sound. I’ve swapped out the HDMI cords with no resolution. Is this my surround sound? My cable box? Any ideas? ‘’’++shandywhite++’’’ try to connect another device on that same HDMI port....

Chosen Solution My Samsung WF520ABP/XAA washer died mid-cycle and stopped turning on. Long story (involving disassembly far enough to release the lock and get my wet towels back) short, the authorized service tech, after re-checking outlets for us, recommended replacing the main PCB. I ordered the part, which just arrived today, but noticed a problem connecting the new board: The existing board is part DC92-00321A, but the part I accidentally ordered is DC92-00321F, which appears to be identical except for no connector or controls for the steam heater....

Chosen Solution I hav got a samsung s2 plus that has got a cracked screen the lcd and touch layer are fine . Is there any way to replace only the glass part? Hey Henrich, it is possible but it can be a mess to do. This video shows how to replace the glass for the s2 and this video shows the removal of the glass display for your specific device....

Chosen Solution Hey guys I’ve seen many similar situations but not quite the same as what I have here. I have an LG plasma, 60pv400, that turns on and works fine for about 10 minutes, but then the screen goes black and I only get sound. It works like nothings wrong for those first minutes. I can pull up the menu and everything. Turning it off and then turning it back on even fixes it, albeit for a decreasing amount of time....

Chosen Solution After screen replacement, the earpiece does not work. No sound at all. The speakerphone is fine. What might I have done wrong that would cause this? Open up and bend the contacts on the ear speaker up and try again if still nothing it’s possible you damaged it so I would try a new one

Chosen Solution Just replaced the battery with this guide and this part. Now the phone wont turn on. I hold down the power button to turn it on, and then it vibrates quickly, then after a few seconds the LED at the top turns a solid blue. Pressing the power button does nothing, neither does the soft reset when you hold down the power and the volume button combos after it turns on, just causes it to keep vibrating every few seconds....

Chosen Solution Situation: Liquid was spilled on lenovo yoga 710-14 ikb laptop. After drying and cleaning, it appeared some of the keys were not working. So I ordered a replacement keyboard, but some keys still didn’t work ( qweruiop). I assumed the new keyboard was faulty, so requested a new one. On the next one, again the same keys don’t work. Can it be boards fault? Or is there a chance both new keyboards are the same faulty?...

Chosen Solution When i switch on my phone i will show only sony xperia logo but phone is not switch on So give me a answer my email id JalaramKengar@yahoo.com Hi, We don’t answer questions via email, this is a forum, as someone else may be having the same issue and would probably like to see the answer to. As for your answer, have you tried hooking the device up to your computer and wiping it in recovery mode?...

Chosen Solution The LCD of my MBPr still works fine it seems but I suspect a problem with the diffusor sheets behind the screen. Does anyone know where one can buy a replacement set of the several diffusor-sheets visible in the disassembly? I would recommend returning your system to an Apple Store as there was a problem on some early displays which would be covered under warranty.

Chosen Solution My Plan: Take my Early-2009 iMac 24" 2.93Ghz 1TB HDD and swap it out with an SSD (at least 480GB) so that I am booting from a flash drive. My Wish: Remove the optical drive and replace it with the original 1TB HDD as a 2nd internal drive My Concern: Will that work? Does the original HDD fit?Let’s say it does fit, are the write speeds fast enough to justify not just popping the HDD into an exclosure for use as an external USB (2....

Chosen Solution Replaced carb, fuel lines, fuel filer, checked spark arrestor, use true fuel only - I am baffled @louis56 when you rebuilt the carb did you by chance reroute the fuel line so it is closer to the exhaust ? This sounds like as the engine gets hotter the power goes away and this can happen if the fuel is vaporized in the fuel lines . Just something you might want to check ....

Chosen Solution I ran out of paper & when I put new paper in the orange light flashes. When I press the orange light button nothing happens & the paper does not feed. go to canon.com and search their support section Hi, I’m having the same problem with the paper not feeding through, and since you asked a year ago, I’m assuming you were able to correct this. Please let me know how!...

Chosen Solution I have a Lenovo Legion Y545 that I purchased from Costco. I believe that exact model is/was Costco exclusive because it tends not to be listed in online lists of Lenovo models. I broke the power port by yanking on it accidentally at some point, and later the connection became flaky and ultimately stopped charging. I’ve sent it in for repair under warranty, but the problem has recurred, this time without me doing anything stupid....

Chosen Solution hello all, do You have some information how to repair anker soundcore pro cause the devices can not be charging. need some tools how to open and battery replacement. thanks Hi @johanesbrain , I might be wrong, but this is a recently released speaker. Is this correct? If so there is an 18 month limited manufacturer’s warranty on the speaker. I suggest that you verify the purchase date of the speaker and if the warranty period is still valid then consult the warranty statement (usually found in the User Guide) If you can’t find the User Guide here is a link....

Chosen Solution So I recently fix my 3Ds XL for my little brother and he dropped it a month after. So after I opened it up and did a System check I found the speaker wire that were connected to the speaker ribbon are ripped out. Is there any way I could fix this by soldering them back together Hi! You can totally solder that back on there. You can have a really good look at this picture to kindda see what goes where....

Chosen Solution Dear all, I bought on the Internet a broken used PS4; the owner told me that he went on vacation and, after 2 weeks, the console wasn’t turning on and so he decided to sell it. The console was never been opened and so I decided to try and change the power supply with a good working one. The console still doesn’t turn on and it won’t beep even shorting the “pad“ on the mainboard with a screwdriver....

Chosen Solution any ideas on how to get hatch unlocked and opened Try pressing this button https://www.youtube.com/watch?v=cnYXzD5B… Next option: Begin by pulling the back plastic cover on the inside lifegate away. The cover will not completely come off so don’t stress. You will need to reach down by the locking device and until you feel a little lever, once you push on it you will hear the locking device click. Pull up on the the gold looking nob or climb out and the lifegate will open....