Posts

Chosen Solution My ipod keeps flickering his lights on and off, how can i repair this? Respect Lord, first off I would try the least invasive way and that is by resetting the ipod http://support.apple.com/kb/ht1339 If that does not make a difference you might be looking toward replacing your LED first. It is relative inexpensive iPod nano (3rd Gen) Color Display the instructions are right here. iPod Nano 3rd Generation Display Replacement Of course make sure that your ribbon cable is connected properly, that no corrosion or other debris prevents the cable from making good contact....

Chosen Solution Sorry for the crap title. A row of keys on my Mid 2012 Macbook Pro stopped working and I was informed that to repair it, I would have to replace the upper case. A shop told me that they would charge 450$ to replace it, which is crazy because thats around the price I bought the laptop for. However I do have an old Mid 2010 Macbook Pro, that I can use for parts....

Chosen Solution So I replaced the battery on the same iPhone 4 3 times due to battery swelling, first time was just the battery draining fast. Is it just a bad batch of batteries or is it the phone causing the batteries to expand? Did they all come from the same source? If so I suggest you ditch that source! I think I once had a battery, probably from a random eBay seller, which was swollen....

Chosen Solution Hello every one, 15th of last November (2019) I’ve purchased a battery for my MacBook Pro (Retina, 15-inch, Late 2013) : MacBook Pro 15" Retina (Late 2013-Mid 2014) Battery Since I didn’t have time to replace the battery immediately whet it arrived I replaced it this week end (25th of January). I strictly followed the instruction on website: MacBook Pro 15" Retina Display Late 2013 Battery Replacement The whole procedure with replacing the battery went fine I have also fully charged it and leave it on charger for 2+ more hours....

Chosen Solution Having replaced the aux in which fell off on day 2. The unit no longer recognizes that input. It sees the BT and SD Card but will not “click” to the aux. solder joints are clean, the replacement aux is now outboard. Any ideas, please??? Hi @jrush , I don’t know the speaker but did you replace the aux in connector with exactly the same configuration connector? There are a couple of ways that BT speakers are usually wired concerning the aux input....

Chosen Solution where is the engine coolant sensor located at Sam Marineau, see if the image helps with the location. Let us know if you find it and what your findings on the ECT are. Hope this helps, good luck.

Chosen Solution Hi, I connected my TZ70 to my PC and downloaded pictures to the hard drive and then disconnected the cmaera from the PC without powering down the camera. SInce then, the display screen on the Camera does not work normally - it displays the “turn off cmera to charge” messagee when connecting the camera to the PC but stays reolutely black when in either “take picture” or “show picture” mode....

Chosen Solution I haven’t used My tablet in awhile so I changed it up and turned it on it went like it was going to come on but then it started flashing viking pro over and over so i let sit for 15 minutes! and it still kept saying it! Anyone know what I can do to fix it? Hi @punkheart1231 , Using an opened paperclip, try to reset the tablet by pressing and holding the reset button for about 5-10 seconds....

Chosen Solution Hi, I received the OLED screen and battery replacement for my iPhoneX. After replacement of both, the phone powers on and displays the initial setup of the phone correctly, but the screen is completely unresponsive to touch. I am forced to unplug the battery for the phone to power off. Thanks for your support First thing I would do is check the flex cable for touch and reseat it, assuming you haven’t done this already....

Chosen Solution Hi there, My LCD screen on the XPS 13 9300 got damaged and I am looking to get a replacement for Dell. The screen replacement process seems easy enough so I thought I could do the re-assembly myself and save on labour cost (plus with the current situation, it’s kinda difficult to obtain service anyway. There are three screws, however, which seem to be Philips type screws measuring 1....

Chosen Solution I’m trying to replace my keyboard as it is dead. After opening the macbook up, i’ve been able to remove a few screws, but a lot of them just will not budge. I’ve tried so much that i’m starting to round them off. I’ve even bought a mini circular saw to try and cut a groove into them, hoping that i’d have something better to grip onto with my screwdrivers....

Chosen Solution My 40’ Samsung TV (model: LEA40A457C1D) screen has been broken/cracked. There is no picture but just a black background with cracks and blue, red, green,etc lines with a bit of white. Is there anything I can do to replace the screen or glass or is it not worth it? Thanks @bwilson90 that panel ( if it is even available) will most likely cost you more than a new TV....

Chosen Solution I have been using this Late 2012 Macbook Pro Retina for almost 6 years. Battery service already came, never mind, started using with charger always, battery support for 2 hours. Recently I have updated Catalina (from Mojave), not able to login, again re-formatted, Installed Mojave, started to use since then. Fan run loudly, Keyboard backlight not working, sluggish performance… When I do SMC reset, can see charger indicator status change, but no change even after restart....

Chosen Solution Of course looking for better speed. My question is: can I run the OSX and my programs on the added SSD and leave my internal HDD for storage? Thanks for the help! In a word YES. However the BUS speed of the optical drive may not give you your expected results. The main drive is Serial ATA (3 Gb/s). I have not found the exact speed of the optical BUS....

Chosen Solution So to cut this short do the sponge bits behind the clips for clipping on the lcd / front panel matter? I’m getting major problems (screens not fitting) and I’m wondering if this is part of it. Also can the ribbon cables push up too hard sometimes? Tnx. Update (07/11/2017) Ah yes it did sound a bit like i ment that part. But i mean the clips on the side of the phones frame that the front panel pushes into to hold it....

Chosen Solution I have a 1984 Suzuki FA50 moped that ran fine until about six months ago. One day I tried to start it, and the throttle got stuck while trying to rev the engine. It would not budge from idle. I unstuck the throttle by twisting it as hard as I could (who says brute force doesn’t work?). The throttle remained “unstuck,” but the moped just wasn’t the same – it would immediately shut off as soon as I applied the throttle....

Chosen Solution I’ve been using my Surface Pro intensivily for about three years, most of times doing intensive tasks that generate a lot of heat, which would explain the problem. It seems like the glue that holds the screen in place is starting to let go, so the screen is starting to pop out in the bottom right corner So, my question is, what is the best way to put it back in place?...

Chosen Solution As I was away, my friend accidently spilled water and apparently there were few drops of water at the back of the screen and around the back of my macbook pro retina bought in December 2014. My Macbook pro was lift up straight away from the table, the water drops cleaned and the power cable was removed. As today, I have the following issues: the battery level (event happened when it was charging and was at 96%) has dropped to 95% then 94%, 93% and now 92% drops 1% each other day....

Chosen Solution I have a TCL 55R615-CA, and after setting it up on a wall mount I noticed the screen seemed to have a flicker, particularly when displaying significant areas of white. I took a slow-mo video of the screen with my iPhone to see if I could tell what was going on. It appears that the screen flickers between full color and monotone-red (which is why it wasn’t immediately apparent on the Roku menu screens)....

Chosen Solution Hi, i Need help how to fix it? Need your guides how to fix it, my ipad warranty is expired. according to apple repair this item cannot repair need to replace 1 to 1. since the warranty expired than i need to up the money MYR 1,300. Please guide me what should i do? it’s logical board? its flash problem, or something else please advice. Thanks Sorry to say to repair this will require a new logic board....