Posts

Chosen Solution I just replaced the right IO board and cable via the parts and guide from iFixit. Upon powering up the machine it still does not work. Any thoughts to the next step? logic board connector IO board connector IO board end of cable Logic board end of cable I don’t see any visible damage on the logic board connector. As you replaced both the I/O board and the cable, that leaves the issue is something on the main logic board....

Chosen Solution how do I replace the transfer case in my 2007 dodge ram 1500 mrtrinity66 , Link below may help, has a write up/steps on how to replace transfer case. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. http://www.justanswer.com/dodge/5lw1w-do…

Chosen Solution Where can I find a NI-MH AA 800mAH 3.6 replacement battery for original Waka-Waka solar light Hi @needtoknowthis , I don’t know your light but according to the specifications, the WakaWaka light battery is 800mA, AAA size. As you state that it is 3.6V (they do not specify the voltage) if you place 3 x 800 mA Ni-MH AAA batteries in series you will have 3.6V @ 800mA as each battery is 1....

Chosen Solution I have a late 2014 mac mini with 4GB RAM. I already replaced HDD with SSD but some apps, even World of Warcraft can cause the system to hit swap. I use it as a secondary device for macOS experiments and alike from time to time… so I’m thinking about doing a bit risky mod - replacing existing Samsung K4E8E304EE-EGCE 8 Gb x 4 with chips of higher capacity and 178FBGA package - like K4E6E304EE-EGCE which are 16Gb....

Chosen Solution My Sharp aquos LC-32CHG6021K TV just updated and now everything is upside down how do I flip it back I have the same problem. The Aquos smart TV just updated and the image turned upside. I called the technical support unit of sharp in the UK. Problem solved. Solution: press menu button on the remote; urgently press 1147; select item 7(panel), press item 9(Mirrow). Done. Good luck!

Chosen Solution When I first turn on my iPod I get a severe buzzing sound out of the headphones and the music is very difficult to make out. Then within a minute or two when the unit warms up, both the buzzing and the music slowly fades away until the unit makes no sound at all. The same thing happens when I connect the unit to a docking station. Any ideas ?...

Chosen Solution Hi, I got a Sager NP8952 a few months ago, and accidentally broke the spacebar on it. Unfortunately, I haven’t found a place to source a new key (checked some laptop keyboard liquidators and suppliers) and wanted to find somewhere other than Sager to get it to avoid voiding my warranty. Just in case anyone ever comes back to this question, I found a replacement keyboard at https://rjtech.com/shop/index.php?dispat…

Chosen Solution My speaker got hit with a ball, and now has a dent in it, the sound is not at all affected but I am concerned if this could ruin the water proofing? From what I see you dented the metal grill over the speaker. So if you have a Boom2 unit then I think you’ll be OK (you still need to have the connectors sealed) for it to be water resistant....

Chosen Solution Hi, yesterday I spilled about a quater of glass of coke on the keyboard of my 13 inch 2015 MacBook Pro while it was running. I immediately turned it upside down and shut it down. Then I let it rest with the lid open and in upside down position. After about 15-20 mins, I was changing its position when I accidentally hit the power button and it turned on....

Chosen Solution Hi, So I fixed a water damaged iphone 6s,changed screen, battery, charging port and WiFi antenna and removed a shorted cap, the phone works perfect apart from when I make a call the person on the other end can hear static, Any ideas would be great. Thanks Andy test using voice memos. if you can record voice memos with no static sounding then the mics are okay and the fault likely lies with something in the network capabilities....

Chosen Solution How do I get my tablet out of safe mode Usually shutting off and restarting will be all you need but if this gives you no joy then you need to try booting from the service menu. You get there by shutting off the tablet completely and then holding down the power button and the volume down button and the same time. When the android icon comes up and the services list select reboot now....

Chosen Solution fan keyboard mouse dont have power.no display on screen, and have activity on motherboard such as have LED light turn on when power on the cpu. Hi, Try the following a). Turn off the PC and disconnect the power from the PC. Remove the coin cell battery from the motherboard. Note the orientation of the battery so that when you go to re-insert it, it will be the right way up....

Chosen Solution Whenever I open the networking section of system preferences I get a message that says “Your network settings have been changed by another application” when I click OK, it just pops up again straight away. It is very hard to quit System Preferences and sometimes i have to hold down Cmd Q while pressing OK. I dont think there should be any apps changing my settings. I am using a wireless connection with an airport express....

Chosen Solution Some context, this laptop has a two audio jacks, one for sound and one for a microphone. In the past, when i plugged my headset in the sound jack i would be able to hear properly and the microphone would also be working through the sound jack. Now, whenever i plug it in the sound goes through the speakers and my headset at the same time and only goes over to only the headset after i twist it a bit....

Chosen Solution The tires are balanced also no wear in tread pattern why dose my steering wheel shake while brakeing at high speed That’s an easy one, your front brake rotors need to be (turned), its a term used for a way to make your brake rotors perfectly flat again in a machine shop, they are slightly warped so when you apply brakes the high spots on the rotor grabs stronger than the low spots causing a pulsating feeling, its real common, if you could remove the rotors yourself it would cost around $30....

Chosen Solution Hi everyone My trusty early 2014 1.4 GHz MacBook Air is working great! One big problem, the thunderbolt video output has gone from intermittent to non-functional. Can anyone tell me which internal board or boards need to be replaced to repair this? Trying to use this with a Henge vertical dock, and believe that the plugging/unplugging from the dock on top of 5 years of road time and many connect/disconnects finally broke the contacts on the connector While I’m in there, anything else I should do?...

Chosen Solution Here’s whats going on, I have a Zoom TAC-2 Thunderbolt Audio interface which I’ve been using for sometime with another macbook pro 17" and it had no problems on a macbook air either.. Just today I tried the interface on two different 17-inch macbook pros of mine (one running High Sierra the other is El Capitan and it appears to get no power from either of them. At this stage I was thinking okay this has to be either the thunderbolt cable or the Interface has died on me somehow....

Chosen Solution I have an iphone 6 plus running ios 11.4 I dropped it kinda hard on the pavement yesterday but the screen was not damaged, it wasnt until this morning that after having it charged it started to loop the apple logo, however this morning it only did it for less then 30 sec.. it has now been more then 4-5 hrs that its been looping. I have a mac laptop and tried plugging it in but the phone does not register and it does not vibrate....

Chosen Solution I recently replaced the digitizer (iFixit part), it seemed to be OK but after a few minutes it starts to type on it’s own or if you attempt to swipe to the next page it will swipe back. I have taken it apart and everything looks good. Is it possible it’s a bad digitizer? It’s possibly a digitizer issue as the iPad mini is notorious for those kinds of issues....

Chosen Solution I repaired a backwards compatible ps3 after it got the ylod using the ifixit kit, and it works fine now, except that it no longer has the ability to play ps2 games. This feature was the only reason it was repaired, is there a reason this feature would be lost, and is there a way to restore it? @snafumonkey79 just in case it doesn’t work, here’s a potential work-around: http://www....