Chosen Solution Hello all this is my first question on this forum so sorry if i might sound stupid sometime ago i bought a iphone 6 that suffered a hard fall (surprisingly only the lcd was broken not the glass) i recently replaced the screen. but the device itself is stuck in DFU Mode so far i tried to restore the device on Itunes and 3utools with always the error 4014 on itunes....
Chosen Solution Hi, Doe anyone have experience and suggestion for a good preheat station to use to ease separation of iPad glass, glueing of xperia screens etc. I am now using a heat gun and have read it is much better with a heating plate. I have some but I guess it is important that it can fit a large iPad. Here are a couple that I have looked at: http://www....
Chosen Solution Who can I send this to , to be fixed? Is there a local company authorized for repairs in Jacksonville, FL, or do I need to mail it to a central service center for repair? Hi, I am assuming that your keyboard does not work when you switch it on, is this correct? Searching online, your tablet mentions that you can connect a Bluetooth keyboard to it. As they are not shown as being supplied as standard with a NuVision TM1088 tablet, is this cover with keyboard an after market accessory to your tablet?...
Chosen Solution Screen broken Are full of change LCD Screen and Digitizer Full Assembly Majid, Instruction on replacing the iphone 6 plus can be seen in links below. Check the attached links,instruction and guides, Good luck. I hope this helped you out, if so let me know by pressing the helpful button. iPhone 6 Plus Screen Replacement https://www.youtube.com/watch?v=tX4oWamQ…
Chosen Solution The laptop screen will not come on and remains blank First ensure the computer has power by booting it while it has the charging adapter plugged in. If problem persists, the computer might be set to display to external screen and not the internal screen. To revert this setting, press fn + f4 to have the computer display to the internal screen.
Chosen Solution I have been researching around online for most of the day but still coming up short on the answers that I am looking for so hoping that you fine people can help me. My thunderbolt version. Is this version 1 at 10gb?. I would have taken this as a yes had I not found conflicting information on a few sites stating that it could be TB2.I want to connect an EGPU to this MacBook....
Chosen Solution Mitsubishi Television WD 60735 timer light blinks ,in a code of one blink ,pause,2 blinks. than goes off and the lamp light comes on and stays on. lauralozano37, that is error code “12” which means “no error” this is because when the TV is switched “Off” the code automatically resets to the “no error code”. Follow this: 3. Error Code Operational Check Note: The TV must be in “Shut Down” and not have been switched Off, to perform the Error Code Operational Check....
Chosen Solution Need my trunk open I don’t have a key Take your car to the dealership so they can verify that it is yours, give them the VIN number and they will make one for you. Its been a while 30 years, since I had this problem. We removed the back seat and were able to gain access to the truck, although I think the answer from ‘mayer’ is the best way to go....
Chosen Solution I am currently replacing my DS Lite shell because of a broken hinge and disfunctional top LCD (It was usually just white; sometimes colored lines appeared). I successfully replaced the shell, but the top LCD still doesn’t work properly. Just white, and if I mess with the ribbon cable, sometimes colored lines will appear. Any suggestions? either something isnt plugged in, or the lcd is bad
Chosen Solution Please help someone, I just got back from a trip and my phone did a factory reset and all of my pics are gone. Nothing has been backing up onto my cloud for a month. Can I get them back somehow? I will pay, I dont know what to do. There are some programs out there that you can use most you have to buy but all will tell you the samee thing first and that is stop using the phone ....
Chosen Solution Hi need some help, my phone got wet I’ve try a few things to get it to turn on but nothing. I have all my sons baby photos on it and I really want to recover them. I don’t care so much about the phone just the pictures it’s kill me thinking I want ever be able to see them again.Help please Hi, first I strongly, and can’t say enough STRONGLY, advise you don’t continue to attempt to turn the device on....
Chosen Solution Okay, so I have a used Macbook pro and It has a windows installation only. I am trying to reinstall MacOS back and pretty much get it to factory settings. I have tried: CMD + R recovery: globe loads, apple logo with spinning wheel, then black screen and white screen after. CMD-Option-R: globe loads, Apple logo loads, grey screen. With options, loading with high sierra bootable USB ends up with white screen after apple logo loads....
Chosen Solution GE TBX18JMS freezer only goes to 10 degrees at coolest setting fridge at 48 coolest setting. I have cleaned the coils, fan and compressor area at back bottom of fridge. No luck. Freezer fan and compressor fans both work. Compressor runs. No blockage in vents. No ice build up on coils in freezer. I ddon’t know where to go from here. Please help. Here’s other things to check: Temperature Control Thermostat If the refrigerator does not get cold enough the temperature control thermostat might be defective....
Chosen Solution My Amana Refrigerator had been sitting unplugged for about 8 months and now I plugged it back in and it doesn’t cool. I hear the fans all running and it has a little cool air flowing through the both the freezer and fridge but not cool enough. All coils are clean and the fridge urns off when I turn the temperature controls to zero. When I turn on the control it all kicks back in....
Chosen Solution Hi! iPhone 6 here, broken screen and dying battery. Figured I would fix both at the same time. I replaced the screen and battery and the phone wouldnt power on at all. I tried to insert my old battery (but I bent it pretty bad removing it) and it would power on the screen, to the white apple screen and be stuck in a boot loop (I figure from me basically bending the battery in half removing it....
Chosen Solution Hello, people. I am from India and I have a 27 inch iMac late 2012 EMC 2546. I purchased Samsung SSD 850 Pro and I am looking to replace the internal SATA hard drive that came with the system. I approached the apple service guys and they said they will do it for a nominal cost but I have to provide them all the necessary components. I have a few queries with regard to this....
Chosen Solution When in turn on my Mac it shows a startup screen with some weird flashing icons. What do this mean? And how to fix it? Looks like it is trying to pair with an Apple external mouse. If you have one close, move it to another room. Try starting up in Safe Mode by holding down the Shift key on start up. This could also mean a trackpad failure....
Chosen Solution ok - hello and how are all ? New to this - so question Sennheiser hdr 120 - had them about 5 years - recently replaced the batteries as thought that was the reason they were not holding the charge. But now new - already charged batteries, still no sound. Cradle - unplugged, and same with headphones - removed batteries for the 15 min reset, plugged back in and batteries back in - still both no sound - despite tuning and volume up to wait - nothing....
Chosen Solution It struggles to play any game and instantly overheats Ive had my switch for about 3 years I ve never had problems until now It’s unplayable Any suggestions on how i can fix it it could be as simple as opening it to check for dust build up and a thermal paste change, another possibility is the fan isnt working
Chosen Solution My Acer tablet turns on but when it gets to “iconia tab” it stops and doesn’t go any further. I turn it on the acer logo comes on then the bubbles then the “iconia tab"comes on and it stops and goes no further. Hi, Try a hard reset on your tab. Warning : a hard reset will erase all downloaded apps and user data and restores the tab to factory default condition Here is a link which shows you how to perform a hard reset....
