Chosen Solution I swapped out the defective touch screen from my Pikachu 3DS XL for another touch screen from a Blue X & Y 3DS XL (the screen on the X & Y one was working fine). I followed the step by step directions on this site exactly and was careful not to damage or bend any of the ribbons, connecting ports or other interior bits I was interacting with on both systems....
Chosen Solution Where can I buy replacement wheels Hi, The quickest method might be to contact the manufacturer by phone and ask if the wheels are even available as a replacement part. Here is a link. https://www.summerinfant.com/contact The manufacturer has a link to replacement parts Front wheel: https://www.summerinfant.com/strollers/b… Back wheel: https://www.summerinfant.com/strollers/f… This is what happened with one of my wheels as well. I contacted the company, while I had the stroller in front of me, and they were able to send me two brand new wheels....
Chosen Solution I found this piece of history on my wife old house attic, I’ve replaced the rear battery, but on start give me this “Illegal Instruction” error. There’s a way to fix it? Thank you all Alex Traditional The traditional Macintosh error codes are displayed like this: 0F0003 Where F indicates an exception occurred, and 3 indicates an illegal instruction occurred. Here are the error codes: https://udcf.gla.ac.uk/~gwm1h/Error_Code…
Chosen Solution Tired of living out of a ice chest. Wanting to take a chance and order a part. My Kenmore 795.72053 Same as many Fridge not cooling Freezer is but freezer not meeting the mark of what I have it set at. I have not had any Error codes. There is no ice build up on the coils. Need to try something. I have cleaned condenser coils. Also The condenser motor just runs and never stops running Thank you for any help....
Chosen Solution I think, using the forum, that I’ve narrowed down my problem. How can I tell if I need a display data cable or an inverter cable ? You just need the cable if it’s working when you move the screen. Here’s how to replace it: MacBook Core 2 Duo Inverter Cable Replacement Here’s the cable:MacBook Santa Rosa/Penryn Inverter Cable Here’s how I get to the display end of it: MacBook Core 2 Duo LCD & Inverter A1181 (fast method) Replacement...
Chosen Solution So my comp will turn on if the charging cord is in and will say 100 % but if i take it out it turns off, and i can’t turn it on without the cord. should i replace the battery? Hi, As there are many variants in the P55W range, how long have you had the laptop? If it is less than 1 year, it is still covered by the manufacturer’s warranty....
Chosen Solution Unfortunately, a glass of wine fell down on my mac. I absorbed the maximum of wine I could with paper towel. After half an hour I started the mac successfully. I did a cleaning of the inside with the help of logic board replacement guide, some alcohol and a tooth brush. No wine on the logic board, but some in the case and on the battery indicator connector (step 21)....
Chosen Solution Hey there I was attempting to take the digitizer off my badly shattered iPad Mini 1 Space Grey and it was cracked so badly there are still chunks on it in really tiny pieces any ways I can save it so I can successfully put the new digitizer and LCD in thank Ps if you can’t visualize I can add a photo You’ll have to scrape them off, with some form of flat tool....
Chosen Solution Hello, while using my MacBook the other day it started crackling and smoke came out of the keyboard. Everything seems to be working with the exception of the wifi. I figured the wifi antenna fried. However when I opened it up to investigate there is a small black capacitor or diode that fried on the main board. It has NEC CN7 on it. Where can I buy this? I am having a hard time trying to find out what this is....
Chosen Solution Hello everyone, I was using my iMac as usual and after trying to copy an image about 4mb in size to desktop from a folder that also on desktop the transfer bar was loading for a long time without doing anything else and as usual I relauched finder and everything on desktop disappeared. Now I have done this many times, if it doesnt come back I would just paste a code in terminal or restart the mac, I decided to restart it this time and when it turned on the loading bar below the apple logo stuck on half way....
Chosen Solution I received the Lollipop update and downloaded 387MiB and after that my FonePad7 keeps getting error while installing system updates and restarts. I have used Droidboot and tried available options like Recovery and Wipe data but it doesnt solve my problem Try a hard reset without a computer http://www.hardreset.info/devices/asus/a… Hope this helps . Please understand this will wipe all your data and restore the phone to factory fresh settings...
Chosen Solution The chain streangthener isn’t working it is hard to put on and it’s one of the older models I presume you are referring to the “derailleur” which is the part of the drive train hanging below the rear axle, with two small sprockets. That moves the chain on the rear sprockets to change gears. Since you haven’t actually described what is going on, so it’s hard to know what to suggest....
Chosen Solution Please i have an acura tl 06 and it does this, the door will be closed but its still gonna be saying door open, if i pull on d door from inside just a bit, it disappears or when I’m driving and d car hits d slightest bump, same thing happens, how do i fix this pls? Hi @ogafemi , It appears as though you have either a loose or faulty door jamb switch....
Chosen Solution The ear bud piece of the headphones has detached from the head band. There was a tiny rod that connected the two pieces but that is now gone. Both ear buds still work bit the left side is detached. @vickie2016 use a vernier caliper to measure the diameter of the pin. Then go to a good hardware store and find a pin with the same diameter. You will most likely not find it under pin, but check the nail department etc....
Chosen Solution I replaced the battery, and it worked fine after that repair. When I replaced the Taptic Engine, I powered it on, and the home button would not respond. It didn’t click, it didn’t go home, it’s completely dead. I’m wondering what I’ve done, or if this is a software lock. Thanks for your help. I think you will find that you have damaged the home button flex cable. The one that goes from the screen to the motherboard....
Chosen Solution Replaced the battery and after charging and phone was powered on there were faint tiny horizontal lines running across the entire screen from top to bottom? The screen connectors may not be correctly aligned or inserted. Disconnect the battery, disconnect them and retry. There should be a subtle yet audible “snap” when they go in place correctly. Check out this guide. Most commonly, there is damage or disconnect in the screen assembly....
Chosen Solution Hi Ann and welcome to iFixit Answers. First, concerning your airport/bluethoot problem: the iBook G4 12" 1.33GHz model has a well documented problem with the airport/bluethoot slot on the logic board causing wireless\bluethoot failures, kernel panick events and airport/bluethoot card reported “uninstalled” by the computer. The problem is caused by a malfunction of the slot where the card is connected to the logicboard. The only solution is to take off the card and restore the wireless function with a USB wireless dongle (or replace the logic board = costly solution)....
Chosen Solution Hey guys, Keep in mind, I am new to IPhone repair. Everything I say in the following text is what I think could or could not be the issue to my problem, please do correct me if im wrong. I have the following problem with my device: My Rear camera does not work. When I open the camera application the rear camera stays completely black, when switching to the front camera there is no issue....
Chosen Solution The circuit in question: https://imgur.com/gallery/lyf7vla I have several 6s+ that are suffering from the common water damage black camera/no flash issue. From a visual inspection, none of the capacitors look totally blown out, except a few that have some dark lines. Are these bad? Should they be replaced? I’m pretty new to microsoldering, but any help would be appreciated, especially concerning how to test the caps. Edit: This phone has had work done to the camera circuit before, apparently to no avail....
Chosen Solution Today I did a battery replacement on a ~2 years old iPhone 3GS. We bought this battery: http://www.mobilreparation.dk/shop/apple…. After the replacement the phone is automatically restarting every 5 minutes. Here is a picture of the original battery: http://i52.tinypic.com/1072jat.jpg Here is a picture of the replacement battery: http://i55.tinypic.com/2i1ii5c.jpg As you see, the APN numbers are not equal. The original is 616-0434 and the other is 616-0346. Could that be the reason?...
