Chosen Solution Hello, I just hit the jackpot at the Salvation Army and got an iBook, 2 dell latitudes and a hp pavilion. One of the dell latitudes work, but the screen is very fuzzy and distorted. This is probably a cold solder joint under the gpu or chipset, but other than that it works just fine. Is the gpu removable, or is it soldered on? Also, how would I fix it at home?...
Chosen Solution Hi, While repairing an iPhone 8 I noticed a sliced ribbon cable in the very bottom left corner. I was repairing the screen and didn’t touch this area at all, the cable is still adhered to the bottom of the casing, just sliced in half. I’ve attached a photo, just wondering what this cable does? It doesn’t seem to lead anywhere and all the functions in that area work (vibration etc....
Chosen Solution Is Surface Book 3 is it completely silent in tablet mode. I mean when it’s detached from keyboard/discrete GPU? Are there any fans inside screen module? Or it’s just silent by design? So no fans inside screen/tablet module and no noise is possible just by design? Based on Surface Book 2, the 13 inch model tablet is fanless, 15 inch has one CPU fan, but has 2 mounting positions for fans....
Chosen Solution I have a Maytag Gas dryer model # PYGT244AWW - gas valve #31001485 The Gas company checked my dryer and says that there is a slow leak. We (the gas co. guy and I) checked all the fittings. No leaks. He suggested I can replace valve and possibly other fittings or get a new dryer since the seal around the drum is old and has shrunk. The dryer works great… but the smell of gas builds up in the dryer between loads, but ONLY ON OCCASION....
Chosen Solution So, some months ago i was using my iphone 5s when it fell flat on the screen. It never turned on scince, luckly i got a new (used) 5s and i left the old one forgotten in a box. Now i found it and i feel like i want to fix it, so, any ideas? Also, the upper part of the screen separated from the phone. Not completely, but enough to create a gap....
Chosen Solution The projector is being really loud right now. How do I tell if my projector is about to overheat? What should I do if it does? You can tell if your projector is about to overheat because the projector will be really hot. If it does overheat, the projector will shut itself off. If this happens, unplug the projector for 15 minutes, and then try again. If this continues to happen, there might be something wrong with the fan....
Chosen Solution Hey guys, So I have my first ever water damaged iPhone 6, fell in the toilet. Some corrosion on the screen connector sockets (and corrosion on the display cables) if you know what I mean. Is that backlight water damage btw? So my important question: I have here some “96% undenatured alcohol” (The packiging is in Dutch, but it’s saying “Alcohol 96% V/V” and than “undenatured”. IS THIS FINE FOR REMOVING CORROSION?...
Chosen Solution iMac Intel 24" 2.8 GHz EMC 2211 Hi, When starting up the iMac it goes to the grey screen with a folder with a question mark. I have replaced the harddrive but its still the same. When I hold any kind of key combination, when its booting nothing happens. When I hold the option key the cursor appears but nothing else. Any idea what is wrong if not the HDD?...
Chosen Solution Hi I know iMac pro got 2666mhz ram but I wonder if 2133mhz will work? this for example: https://www.ebay.com/itm/4x-For-Samsung-… Don’t screw around with this expensive of a machine. Use what it calls for! RAM Type:DDR4 ECC SDRAM*Min. RAM Speed:2666 MHz Details:Uses “2666 MHz DDR4 ECC memory” (PC4-21300) modules. Here how to do it: https://everymac.com/systems/apple/imac-… It’s not easy to do and you probably don’t want to do it twice in case your RAM does not want to work....
Chosen Solution So I have a phone here that is not auto focusing. I’m not sure if it would be a camera issue or a sensor issue. When you tap on the screen, it will not try to auto focus like it normally will but you can zoom in and out and looks a little bit fuzzy. The front facing or selfie camera works perfectly. The motor is damaged on the rear camera so it can’t focus....
Chosen Solution Hi, I have an iPhone 6 which has bad top speaker quality. I tried a new speaker as well as a new front-camera assembly. But the problem remains. I also tried cleaning the speaker mesh. There is sound coming out of the speaker, but it’s bad quality. It’s like there is no bass, and you’re like in a fish tank or something. Anybody got any suggestions? Turns out there was a lot of dust in the speaker mesh....
Chosen Solution I bought and iPhone 6s from a dealer on the market. I couldn’t get time to check it so I came home and factory reset the phone and then found out that it has a remote management lock(MDM) lock on it. I was wondering what if I change the motherboard? Will the remote management lock be removed to make the phone a new one?? typically you cant get passed this, its used to deter thieves from reselling stuff they’ve stolen....
Chosen Solution Hello, I’m planning to upgrade my old mid 2010 21.5” iMac 3.06 GHz i3 by adding a SSD drive. I was going to take out the optical bay drive and replace it with the SSD but I’m not sure if the SATA port is SATA I (1.5Gb/s) or SATA II (3.0 Gb/s) I know for sure that the HDD port is SATA II but I’m wondering for the Super Drive SATA connector....
Chosen Solution One day I went to the Apple Store. They informed me that my battery was old. I replaced the battery and it is still draining too quickly. I lose 1% every minute. I even went as far as restoring the phone back to factory still happening. At times the phone gets very hot. Anyone having similar issues and what can I do to resolve or pinpoint but the problem is?...
Chosen Solution First, let me apologize for the lack of pictures. I don’t have the device in my shop anymore. I had this issue on a customers phone last week and determined it to be a faulty replacement screen, or so I thought. Issue had developed about 1 week after I had replaced the screen on the customers iPhone 7. They stated it would randomly become bright white then black and be unresponsive....
Chosen Solution Hey there, My iPhone 5c has a dead zone right in the middle that detects no touches at all. I assumed that was a problem with the screen which I replaced with a part and instructions from this site. Procedure worked fine! BUT the replacement screen has the exact same dead zone. Does anyone have any idea what the issue might be? Thank you… A dead zone like that on multiple screens point to a logic board problem....
Chosen Solution No picture. Happened suddenly. Tried the troubleshooting in book. Removed power overnight, same results. Called Sony, they had me reset to factory settings. Now no picture, no sound, nothing. Tv is only 3 years old! KDL-40W600B. Told me to contact repair facility 2.5 hours away! @algog43 proceed by following the triage chart for your model and let us know what you find. We still need more info to see if any LED is blinking....
Chosen Solution I have a two IPhone 6 A1549 phones one is a 16 gig and the other 64 gig. I need to replace the battery on both. If I place the order today would they arrive before Christmas? Most likely not, as tomorrow is only day left for Mail to run before Christmas since no shipping on Sunday or Christmas day.
Chosen Solution no power when switched on Denice Terink, Find below a disassembly guide link that you can use to disassemble the hand vac. and test/inspect switch/components with a DVOM to determine if bad, check wires/connections for being loose/burnt /broken, test replace batteries if not holding a charge. Also check charger contacts for corrosion/damage and check charger out put with DVOM to see that it is in deed working. Good luck....
Chosen Solution Hi everyone, I recently got a good deal on a MAcbook 12 2016 model. All I had to do is to change the screen, as the seller managed to break it. So I ordered a replacement screen, but unfortunately in the end it turned out to be a 2015 model, which only has a magnet on the left side, as the 2015 MacBook only has 1 sensor installed. Because I didn’t want to go though the whole ordeal of sending it back, getting a refund and re-ordering I decided to make it work myself....
