Posts

Chosen Solution I just replaced the screen and logic board. There’s some light but the screen won’t display any image. I had this problem with my Sony Xperia T2 Ultra. Have yet to figure out what it is… When I tried to diagnose my phone, I replaced the new “faulty” screen with a new one but the same thing happened. The DIGITIZER seems to be working because when I swiped up when I though the boot reached the home screen, I could feel the phone vibrating because I was pressing the different keys to my passcode....

Chosen Solution The superdrive don´t read the cd’s and dvd´s that I insert in it, either burn blank cd´s or dvd’s. Can I change it for another product? If you’ve bought it from iFixit, then you need to take this up with iFixit directly, see Sales Policies for details. This isn’t the place to deal with this. If you bought it elsewhere, then you need to approach the company you did buy it from....

Chosen Solution So I’ve had my Samsung S5 for about 3 years I think. I bought it when it was getting close to not being sold by ATT any longer. It never worked all that well with battery daily battery life, but over the months and especially in the last couple months, I’ve gone through several batteries, about 6 or 7 from when I first purchased it. I know that unused/shelved batteries do degrade even when not used, but I suspect that there is something defective in an IC or in the board circuitry that is damaging the batteries....

Chosen Solution i purchased 2x2gb ram chips (pc2-5300) and did not realize until i received it that it was pin 204. i am trying to upgrade my old early 2008 macbook penryn so i can use it as a stationary home entertainment system and i think this particular model is the last few that uses 200 pin before apple switches to 204 pin. anyways, i don’t know if that makes any sense but i need to know if i can use these or i need to buy two more ram chips....

Chosen Solution i have mac book g 4 1.2 ghz model a1054. upgrade the ram to 1.25gb . at the begin it was 1.25 next day shows only 768. what did i worg please send me a answeare @ najim@live.ca also in the internet i search and it is a comon problem but how can i solve it ? Hi! First I would reset the PMU and PRAM. If that doesn’t help, I’d remove the extended RAM, boot up, and see what amount it says is installed....

Chosen Solution Hi guys, My mid 2015 MacBook Pro with Radeon graphics that I bought 2.5 years will randomly/intermittently freeze. Then when I restart the system I get a blinking “folder with ?“. I did reset SMC & NVRAM and its still failing. My computer only work when you stop using it for a couple of hours, meaning you have to rest the system. This problem is hard to replicate because it happens randomly....

Chosen Solution Hello everyone! I bought my son a Rastar F12 ride on ferrari. After just few weeks it stopped working. I changed the circuit board, and the car starts now however the remote control that comes with the car is not. Im assuming it’s because I changed the circuit board. Anyone has an idea how to pair the remote and the car? Thank you very much! Hi @estafford , Looking at the user manual, the only mention of “matching” the remote to the car is on p....

Chosen Solution The rear-facing 16MP camera (not the wide angle) will no longer focus. I’ve tried all the usual software fixes (factory reset, etc.). I can actually hear a mechanism inside the phone “trying” to focus, but it seems to be locked into the nearest focal point. Before I send this thing back for warranty replacement (which involves fixing an old, busted LG G3 first so I’m not without a phone for two weeks), does anyone have a suggestion about how to fix it?...

Chosen Solution Recd a message stating my battery is affected with an Virus- Please let me know thanks That’s just spam, no action required apart from deleting the message.

Chosen Solution My Thinkpad is about 3 years old and one day I felt what I thought was dirt on the trackpad. I scratched it and the vinyl coating came off, now it has a nice big scratch across it! Under th coating it is nice and shiny, so I was thinking of removing the trackpad from the laptop, scraping the rest of the coating, and spraying on a new coating....

Chosen Solution So I am replacing my original keyboard and had to pry it out popping the rivets that held it in place to the upper case. I also had to tear off the black membrane that protects the back of the keyboard, separating it from containing the motherboard. I ordered and received a replacement keyboard from ifixit, however there are no screws or membrane. What size screws can I use?...

Chosen Solution My old iPhone screen got cracked, so I decided to get a cheap eBay replacement (or 2). The first one worked fine (apart from obvious display quality issues) but when the screen closed it seemed like the metal block on the back of the screen right below the camera was interfering with the display connector shield. This is proven when I remove the shield and close the phone, as the pressure marks are gone....

Chosen Solution Hello guys, this time I am here to know if there is an easy way to measure the screws in a set of replacement screws for iPhone 5s. Thing is I only need the ones holding the home button bracket (1.4mm #000 phillips); the ones holding the battery connector bracket (1.6mm #000 phillips); the ones holding the front panel assembly cable bracket (1.7, 1.7, 1.3 and 1.2mm #000 phillips); the ones holding the earpiece speaker bracket (4....

Chosen Solution How difficult is it to replace just the keyboard? (I see that several folks sell them) You have to replace the whole upper case, here’s the part: MacBook Pro 13" Unibody (Mid 2009-Mid 2010) Upper Case For installation instructions go to the More information on the parts page and click the link to Step-by-step installation instructions. This is listed as a dificult installation. I’m doing it now, will update on how it goes....

Chosen Solution Hi all, This is my first time posting on here, so excuse the inner noobness. I decided to clean the fan out, I thought I would have a look at the RAM stick so I removed it and then re-inserted it… Upon hitting the power button, I didn’t get the normal chime; just a blank screen, and a beep every 5 seconds. What is happening: Hard drive makes a sound - like it is doing something for a few secs after powering onFan runs the whole time (it runs quietly)It beeps every 5 seconds - I know that this is related to no ram sticks being detectedThe standby light flashes (as it beeps)The screen stays blankBattery charges What isn’t happening: EverythingIt won’t boot upCaps lock doesn’t light upIt won’t chime What I have tried: I have unplugged the battery and held down the power button (to try and drain the motherboard)I have attempted to do a Pram resetAttempted to do a SMC reset The list goes on… however post your thoughts regardless of if I have done it :) Side notes: It has been well looked after and was running fine prior to dumb me removing the RAM stick and cleaning the fan....

Chosen Solution my moto x screen has cracked. the display and touch are working perfectly fine, is there a way i can only change the broken glass and not the whole set ( display ,touchpad ).amazon is selling the glass for 7$ will that glass fit into my phone and work fine ? This guide Moto X Display Assembly Replacement makes it seem like the screen and touch display are all one part....

Chosen Solution Once when i was using my laptop i accidently lose grip and my laptop fall on the floor.The screen is not cracked from outside but it doesnt display anything. Hi, First try the torch trick to see if it is a LCD backlight (or lid switch) problem. Turn on the laptop and when you think that it should have booted all the way to the Windows desktop (check HDD activity light has settled down), shine a torch at an angle close to the screen and check if you can detect the Windows desktop image....

Chosen Solution After screen replacement my screen won’t turn on. The phone was switched of and the repair was done. When the new screen wasn’t working I tried putting the old cracked one back on it but it didn’t work either. I’ve done lots of screen replacements but have never come across this problem. I have tried everything but cannot find any fixed please help. Did you forget to unplug the battery?...

Chosen Solution I replaced a screen on an iPhone 12 Pro. I tested the screen before removing the camera from the original. The test involved plugging the phone in and seeing the battery charging on the screen because the battery was dead. I went ahead and finished the replacement procedure. Before pressing the new screen onto the new glue I tried another test and nothing came up on the screen. I am at a lost as to why the new screen doesn’t work now....

Chosen Solution if you want to know about eTrade, go ask THEM. Is this what you are looking for? iPhone 6 Screen You cannot buy an “Apple Original” display. Apple does not sell parts and does not authorize its suppliers to sell parts. Anything you buy that says “Apple Original” is from a sham company and should be avoided. You can however, find screens sold as OEM. These generally use the Apple LCD and glass similar to what Apple does....