Posts

Chosen Solution Hello everyone, I have iPhone 6S plus and it seems like the rotation gone insane. The screen rotates to left side with no obvious reason and doesn’t rotate when I want. I also noticed that it affects the raise to wake function. My device isn’t jailbroken and to solve this issue I force restart the device. Simple reboot doesn’t do it.. I thought it might be an IC issue… anyone here can help me locate the cause of this problem and perhaps a fix?...

Chosen Solution Is It Safe to Factory Reset / Format on Android Device? @k_a_v_i it is just as safe as doing it on other devices. Remember that you will lose most of your files etc. Make sure that you have a backup. Of course, it may also help if you elaborate a bit and tell us what it is that you are planning on doing and why.

Chosen Solution Hi there, I washed my whole charger around 10months ago in washing machine on 60 degrees. After i noticed I did put the whole charger and wire into rice. Any chance the charger is safe to use again? don’t wanna risk any damage on my MacBook. Do you really want to risk destroying or damaging your over $1000 machine just to test out a $45 charger? You already bought a new charger....

Chosen Solution I have a late 2006 iMac with a broken display and an early 2006 with a dead power supply. Can I use the display from the early ‘06 mac to replace the display in the late ‘06 mac? Thanks in advance. Yes you can, see here: http://i.imgur.com/DNB9W.png The early 2006 uses the Samsung 661-3895. The late 2006 uses the Samsung 661-3895 OR the LG 661-3881. So yes, you can swap em....

Chosen Solution Samsung PS42Q96HD , psu-BN44-00194A. Need Caps identifying Please. ( Position no`s on board with red on cap tops on Picture 3, ) CB402,CB801, CB806, CB807, CX801, CX404, CX408, CX409, CX410, CX411.CX413.The CX801 is sort of hidden but marked on picture 3 in centre of board. Also i need 2 surface mount resistors identifying on back of board , ( Position no is ,RS827, RS828. These are marked in picture 1 and 2 showing position on board )....

Chosen Solution Hello, hoping someone have direct me on the right path. As the title says, Samsung WA52M7750AW top loader. The washer runs fine, but the select buttons, temp, spin, soil, pre load, extra rinse, etc, don’t work. You can’t change the selection. Power and start/pause, door lock all seem to work just fine Would issue be the touch sensor assembly or control board or main board? I’m leaning on the touch sensor assembly?...

Chosen Solution I dropped my Galaxy S7 in a carbanated beverage and now my screen only works after my phone dies and I charge it. If I take the charger off it still works until the battery gets low and then it quits again and I have to wait With water damage, you have to decontaminate the logic board before doing anything else, otherwise there will be latent issues down the road....

Chosen Solution My 10-15 years old little juice extractor has a problem and i want to open it up to see what i can do. It has 2 very peculiar screw heads. Does anybody know what they are called? It start off with a full pentagon and then from each corner there’s a full triangle going out. You may have to find a Braun Multiquick-3 MPZ9 Tamper Proof Screwdriver. It’s not easy....

Chosen Solution My friends live in a brand new house. They have had 4 different washers delivered and professionally installed. After the first test load by the installer, the washers begin making a very loud grinding noise. Different makes and models. A plumber has checked the pipes and says nothing is wrong there. The machines have all been top loaders and leveled. Ms Cooper, Maybe they should try a front load washer, Consumer reports seem to favor front load washers to be quieter and with less vibration when in use....

Chosen Solution the shifting gear cannot get the right position. Hello, This is due to failure of one or more of your shift bushings. They are small round plastic bushings that allow for smooth and quiet operation of the shifter, when they are all intact. I will be writing a guide for replacement of these in the future but for now hopefully it is helpful to know what the problem is....

Chosen Solution how can i make the numbers seven eight nine and zero to work velasquez_family sounds like a bad keyboard. Try a USB keyboard first and see if that works. If so, replace the one on your laptop. Download the service manual from here Page 33 will tell you how to replace the keyboard.

Chosen Solution Are they larger and a different/ updated audio codec? Also, any speaker difference with the iPhone 7 ( 4.7 in.) version ? Thanks Go here, go under the phone and hit “watch the keynote”. The Phone presentation starts about midway. http://www.apple.com/iphone-7/ UPDATE Here’s the teardown iFixit just did: iPhone 7 Plus Teardown

Chosen Solution hi All, I time machined the data to my new SSD. But I am not sure whether I am ready to take apart the Mac and replace the old drive. I am afraid that the Mac will not boot up with new SSD installed. Am I ready? (or I need to create a boot USD?) Thanks for the help. (Lots info online, but looking for more clearer answer) Best,...

Chosen Solution The screen is broken. There came ink into the phone. Nothing is working @januse that is not ink. That comes from your broken AMOLED display. Replace the display assembly and re-evaluate. This video should help you with your phone repair.

Chosen Solution phone has been repaired but the touch sensitivity feels like in has been turned to 10. I can be using my phone or an app and then all of a sudden the screen will jump onto something different even though I haven’t pressed or touched it anywhere else. Any suggestions would be appreciated. @swifty01 , Matthew, Have you tried taking it back to the repairer and telling them of the issue?...

Chosen Solution I ordered a screen for my ipad mini, and it isn’t working properly. Here are the symptoms: I am not able to access the home screen of my ipad because the touchscreen doesn’t recognize any touch.Occasionally Siri will say, “I didn’t hear that” even though the iPad is sitting on the table untouched by humans. Please advise. Shane I’m gonna go out on a limb and guess you’ve either received the wrong part for your iPad, or you’ve just gotten a bad part, and need to handle a warranty with the supplier you’ve ordered from

Chosen Solution Where can I buy hdd for iPad Air 2 By replacing the hdd I can eliminate The iCloud lock Thank you all, josef @berjo the iPad does not have a HDD. All files and system information are stored on IC’s. The only way to unlock it is through Apple with proper prove of ownership. A new logic board that is not iCloud lock will of course work as well....

Chosen Solution Hello. Posting this after perusing forum here and elsewhere. Just finished opening and re-seating the touch screen cable. iPad 4 wifi 16gb, zero history of abuse. Never dropped and could go back in the original box as still looking new. Touch screen quit working. Resetting it did not work. Followed instructions and successfully removed the screen and LCD. Carefully disconnected the screen and home button ribbon cables and re-seated Same with LCD....

Chosen Solution Hi, Can’t seem to find info on this online, does anyone know if the PSP 3008 screen is the same as the 3000, 3001, 3003, 3004? Found a replacement for those models locally but not sure if it fits the 3008 (I believe this was a russian model) Thanks For anyone else looking for this answer, yes the 300x series are interchangeable. Ordered one that stated it was only suitable for the 3001,3003,3004 and worked flawlessly in the 3008 model....

Chosen Solution I have a Samsung S-7 edge in less than two months of use, vertical purple line on the screen appeared. Screen replaced with a new one, and after less than a month the same line back in the same place. I tried to repair by clicking on the cable behind the screen where the light pressure when the line disappears. But I messed up the work of the screen entirely....