Chosen Solution Hi All I hope someone can help me with a problem with my iphone 6 camera. When opening the camera sometimes the image is all blurry, if i bang on the side of the phone the picture clears and the picture is normal again. I have taken the phone apart and re-seated the camera connectors and made sure everything was screwed securely but still have the same issue. Any ideas what the problem is?...
Chosen Solution I’ve got a Kenmore model 110.78832700 natural gas dryer that’s stopped turning on. When you click the start button you can hear a relay click, but nothing happens. Before it stopped working you’d sometimes have to give the drum a push to get it to start spinning, so maybe I’ve burned out the motor? If I’m lucky it sounds like my issue might be the thermal fuse: https://www.repairclinic.com/PartDetail/… Any ideas or things I should check?...
Chosen Solution removing auto trasmission how do i get to the torque converter bolts Rikki Lerm, here is what the manual says, so try this:" Removing the Automatic Transmission Before starting this procedure drain the automatic transmission fluid and transfer case fluid (4wd models). It’s important to dispose of all fluids at an authorized recycling center. Remove the negative battery cable. Remove the crankshaft position sensor. It is located on the top driver’s side of the bell housing....
Chosen Solution I finally received my Power Mac in the mail today and I am a very happy camper. It works like a charm and has OS X Panther as the OS. I am also planning to create some repair guides soon for this Mac as there are currently none besides a teardown. Here are my system specs. However, the outer shell is very damaged on one side… Now thats a lot of damage!...
Chosen Solution My screen was broken and I started replacing it and I tested it before I fully put it together and after I was done putting it together the charge symbol isn’t showing, I don’t know what to do, I’ve done the holding home and lock button and tried various other things but still nothing Hi, Did you unplug the battery before the repair? If not, you may have blown the backlight, try testing it with your old screen to see if there’s any signs of life....
Chosen Solution After a drop the right speaker doesn’t not sound, but all other things are working (Including touch panel, mini led red light). The bluetooth still connecting to my phone, etc. It’s like the speaker was disconnected. I did open it but all the things are connected correctly. Please help. If you know someone that know how to repair it, let me know please. Unfortunately and sadly not, tried a lot options and nothing....
Chosen Solution Can the 2012 Macbook Pro non retina model run snow leopard? Certain drivers are said to not allow the 2011 Mac Mini run Snow leopard. Is this the case for that machine as well? I’ve never seen a Mac able to run a system earlier than it came with. It usually just won’t install. This comes with Pre-Installed MacOS: X 10.7.3 (11D2097). Looking for a nightmare ? Try installing Snow Leopard on this model....
Chosen Solution Which Samsung ssds are compatible with iMac 27” Mid 2015 PCIe slot? Only the custom Apple blade SSD’s will work. Here’s a good guide: The Ultimate Guide to Apple’s Proprietary SSD’s
Chosen Solution What is proper screen replacement for 13" model A1502 (mid 2014)? Here is the IFIXIT guide you’ll need to follow: MacBook Pro 13" Retina Display Mid 2014 Display Assembly Replacement. And here is the replacement screen: MacBook Pro 13" Retina (Late 2013/Mid 2014) Display Assembly
Chosen Solution Hey All! Been a while, hope everyone is doing well! I have a question that’s been driving me nuts: 2020 MacBook Pro, unusable smashed screen, has been wiped and reset via Configurator 2 and does not have recovery partition. Will not boot to external because of default setting in T2 security utility, and target mode won’t work for the same reason. I can’t get an external display because the initial WIFI prompt for internet recovery mode does not display externally....
Chosen Solution It will not boot up completely. I have tried safe mode, apple hardware test. But get this: I removed the powersupply and checked visually and saw no burn marks. Diagnostic lights all come on. If I leave the lcd screen disconnected and connect an external monitor it boots up fine, but the fan is a lot faster, I imagine because of the temperature sensor not plugged in. What is up?...
Chosen Solution In a nutshell: I bought a Power Mac G5, I believe 2.3 GHz. 160 HDD, with 8 GB of RAM. I got it at a thrift store. Password locked on screen. Couldn’t boot single user, from external, nothing. Also reseting PRAM was a failure. Thought well I have TransMac software and USB drives. From a Windows system I booted up the system. Under Windows CMD I cleaned & converted as well as created a primary partition in GPT instead of MBR....
Chosen Solution Well I have the same problem, I bought a Kingston HyperX SSD SATA 3. I replaced the Apple HDD (Toshiba) and the SSD isn’t recognized, even in disk utility. I also tried with a Hitachi HDD it also is not recognized, the only HDD recognized is the Apple Toshiba drive. I have a MBP mid 2012 Any idea? Thanks Well, I changed the sata cable and it works now :)...
Chosen Solution Hi All, I have here one iPhone 5s that dont charge and dont boot even with an charged battery. Laptop connection dont detect the iPhone or even charge it. I replaced the battery for another and he starts boot but just shows the apple logo and nothing happens. I changed the MotherBoard to another housing and same problem, no charge and no boot (Just Apple logo) There is someone with same problem?...
Chosen Solution This is an amp for a B&W ASW608 Subwoffer. The unit will not power on. I checked the fuse, cord, and visually inspected the 2 boards. There is not sign of blown caps, or board discoloration. The traces and overall appearance is pristine. I don’t have the ability to test further. Any guess as to what it maybe? Someone said the modulator could be the issue? I’m good at soldering if I knew how to proceed....
Chosen Solution Good morning, my name is Andrea and I’m a hardware technician at the Ministry of Finance in Rome. I have a iMac i5 2011 that does not start anymore. The diagnostic LEDs do not even light up. I changed the power supply but nothing. I realized that the damage is on the motherboard. Is there a fuse or capacitor I can control? thank you Solved……my problem is video card…....
Chosen Solution I didn’t switched on this for 3 years. I brought this from USA. Now am at India. Is there any hope to repaired or not. If yes means, how much it costs Hi, Most probably the battery in the tablet has been depleted to a point beyond recovery and will have to be replaced. You could try connecting the charger to the tablet and leaving it connected for about 4-6 hours and see if there is a remote chance that it might start charging the battery again....
Chosen Solution Instead of using microwave to heat pry tool are there dangers using a heat gun? Hey Wayne, There are definitely dangers in using a heat gun but it has been the industry standard for softening adhesive for part removal for years. Those dangers primarily being heating parts of the device that you do not intend to heat. If the “pry tool” you are referring to is the iFixit iOpener, then I would highly recommend using that....
Chosen Solution When I turn it on I just hear one long beep followed by 2 short beeps These are post codes (aka “beep” codes) that the BIOS gives when there’s a hardware problem. Unfortunately, there’s no universal standard for what means what between board manufacturers (or even between boards by the same!) I’ll need to know the exact model to be able to give you more than that. Have you recently done anything with the memory or other hardware?...
Chosen Solution the leather is separating from the ear cup. is it covered under warranty? 27patwells , I believe the warranty is for one year from date of purchase and if it is a manufacturing flaw/defect it should be covered. Contact Beats product service and warranty at the link below and just let them know this is unacceptable performance and the material should not be seperating. Good luck. I hope this helped you out, if so let me know by pressing the helpful button....
