Chosen Solution The antenna interconnect cable that plugs into the socket on the logic board has come apart. The socket pulled loose from the logic board. I lost the socket. How do I fix it ? Can I purchase this socket ? If so What is the name and part number to this socket ? Those antenna connectors are not easy to source. It seems like there are quite a few different sizes being used....
Chosen Solution Hello! I have a New 2DS XL where the top screen is always black but the backlight comes on no problem. The bottom screen works perfectly for display and touch input so it doesn’t seem like there’s a full on connection issue somewhere, and I assumed that the top screen ribbon cable was just seated badly. I re-seated it (to the best of my knowledge) but the issues persist....
Chosen Solution Hi, My regza model: 52Z3500E has a display issue after power-up. I expect a blue screen, instead a band of colored lights moving about around the screen. Is this a serious issue and still fixable? Thanks Larry @larry_garcia without actually seeing those bands and just going by your description, this could be a T-con board, main board or panel issue. Post some pictures of what your screen shows with your question....
Chosen Solution Had a power outage the other day. Once power was back, my Inspiron 3847 would no longer boot. No power at all. No light on power button. PSU had green light, but was dim and flickering / pulsing a bit. I followed the PSU test from this page: ++https://www.dell.com/support/article/us/… Steps tried: Opened up the case, and unplugged the PSU from all components. I plug in power, and light is full bright, solid green....
Chosen Solution Purchased a iFixit LCD for the iMac EMC 2389. It does not come with the two frames on each side with the magnets. How do I remove the old one and install on the new screen? I looked at the LCD cleanup, but that doesn’t fit the model. Need ya help on this. The raw LCD screen is held to the frame with four screws that on the left & right sides....
Chosen Solution Trying to dislodge a leaked battery in my apple wireless keyboard (the 3 battery variety a1255) I must have have been a bit too rough and detached a solder pad in the power switch assembly. I am trying to attach a picture here (the stripped pad position is TP1, just right of TP3 in the picture and the missing pad is still attached to the black wire). https://www.dropbox.com/s/yurz74ylm2iwm2… I read a bit online about reattaching solder pads to PCBs, but don’t really know how to do it....
Chosen Solution Is it possible to remove the stand for the new imac 21.5? It’s not removable or user removable as the previous 21.5" models. only the 27 inch iMacs have a removable pedestal. This will not work with a 21.5 inch iMac.
Chosen Solution The light is functional but it’s the yellow’ish (soft white) and I prefer the daylight option instead. It has 40 LEDs on it. The light is a wall sconce light. Here’s a link: http://www.lampsplus.com/products/possin… And here’s a pic of the leds. My question is broken down into several actually. -Can I remove the current LEDs and replace them with my preferred variety? -Suggestions on how to remove them? -Recommendations for where to pickup the replacements?...
Chosen Solution I just recently purchased a display assembly for my Macbook Pro 15 inch. I swapped it in and when I power it on, I get no backlight. I can see that the display is on and working but it has no backlight. I went ahead and put the old display back in and it worked, backlight and all. I’m not sure what’s going on. I did notice the LVDS cables had different part numbers....
Chosen Solution I replaced the screen. Worked perfect for 2 hours. Then suddenly, the pictures on the screen began to vibrate. Then lines formed. Then the screen went blank, with a dull grey blotch in the middle. I called “support”, they suggested cleaning the screen terminals. I did that, nothing changed. Sounds like a bad quality screen (faulty). Not sure whether you’ll be able to get a replacement under warranty from the supplier / seller....
Chosen Solution I replaced the glass and touchscreen on my 3GS. It powered up fine on forst try but now the touchscreen is WAY out of claibration. When you tap on an icon in the middle of the screen the app to the left launches. The 4 across the botom don’t launch at all… Help! Open the iPhone back up and reconnect cables 1-3, check for dust etc. Most likely 2 is the culprit....
Chosen Solution Could you give me a quote for a new speaker for a Gameboy Colour? If possible. Preferably an email quote as i need to send this off. stebenson19@live.co.uk Regards.
Chosen Solution Does new adhesive need to be put on, or is it better to just re-use the existing adhesive? thanks. Here are two very good answers for this: About display. How to hook back after take it off?
Chosen Solution Depending on the series you may need to add-in a replacement thermal sensor to offset the removal of the one within your HD if you swap them. If you use the dual drive kit replacing your optical drive with a SSD then you don’t need to worry. You may want to consider swapping out your HD with a SSHD which is a hybrid drive. Both Seagate & Western Digital make 3....
Chosen Solution Hello, So I just bought a used Marshall Kilburn Bluetooth Speaker without the battery, thinking I could easily replace it on my own…little did I realize that its not that easy. Turns out Marshall doesn’t even offer a repayment battery for a product they have had out for 2 yrs now. Anyhow my next idea was to find an after market one and modify it as needed, that to is a little beyond my skill level....
Chosen Solution Hello everyone, I purchase a new screen for my broken iPad Pro 11. But now , I need to restore true tone capability. I don’t find anything on the web to do that on iPad, only for iPhone. Do you know where I can find something ? Thanks :) No one currently makes a tool to transfer the data from one screen to another for iPads. They do make it for iPhones....
Chosen Solution My old PS4 will not power on so I got a new one. Is there a way to retrieve my saved files from the old hard drive. Unfortunately, no, it isn’t possible at all. There are only a few ways to approach the data, and none of those options is viable: connecting the old drive to a computer won’t work, it’s in a format unreadable by anything else than a ps4 putting the drive in your new ps4 won’t work either....
Chosen Solution Right corner doesn’t go in alle the way, the left one does. How can i Fix this?’'' ’'' As glass is obviously present your best bet is to use one of the guides to remove and reinsert the screen, which I believe is the first part to remove. If you’re not concerned how it looks then just ignore it the 6 or even 6s doesn’t have any water resistance anyway....
Chosen Solution Two weeks ago I replaced the screen on this samsung galaxy s7 for a customer and they have sent me a message today with a problem with the screen. They have told me that it has been on the desk the whole time and that the glass isnt damaged at all. Could I please have everyones opinion on what the purple mark is and how this could have happened ?...
Chosen Solution Can anyone advise which Galaxy S3 model(s), if any, where the LCD is compatible with my S3 G900A? Looking for reasonably priced working LCD only. Thanks for any assistance. mdees2 the G900A is not a S3 but a Samsung Galaxy S5 (AT&T) SM-G900A. This phone, amongst others by Samsung, also uses a Super AMOLED display and not an LCD:-). So you are looking for a display for it? There is no compatible display other than the one for this model....
