Posts

Chosen Solution Hi everybody. Recently I opened up my iPhone 5s because I eperienced some ghost clicking and I read on this forum it could be because of some bad connected connectors. Well, I accidentally broke the copper tape in the process. I completely removed the copper tape, closed the device and started using it to see if everything was ok. Unfortunately, while I fixed the ghost clicking issue, I realized there were problems with the rear camera....

Chosen Solution Tienen disponible el manual de reparacion del modelo Carefusion VELA? Necesito con urgencia. Clara Almirón ….. Espero que esto te encuentre a tiempo amigo. buena suerte https://www.medonegroup.com/pdf/manuals/…

Chosen Solution I just replaced my battery, and when my mac’s plugged in, it works fine. However, it’s been charging for about 10 hours now, and the indicator light is still red. I also generated a system report on the battery and received the following info: Try double checking every cable and connector is properly seated in place. If everything seems fine try your old battery again, to confirm it’s a battery issue....

Chosen Solution I have a MacBook Pro A1226 with Glossy Display. My backlight still worked, but was flickering and looked like every other light was lit most of the time (striped lighting from the bottom.) A friend said he has a MBP that was the same age as mine that the nVidia chip died and never got it fixed, so I could have his screen. So I took my laptop apart, replaced the screen with his, turned it on and there was no backlight....

Chosen Solution Hello all! I’ve been using this website ever since my 2007 Intel iMac went kaput the first time, or so I thought. Using the guides on this site, I’ve been able to repair my computer more than once. Every time a problem popped up, I would use this site to narrow down the possible reasons for its issues, and with a pretty decent amount of luck and these guides, I’ve been able to successfully repair my computer....

Chosen Solution My question is more software than hardware. I have the original 500GB that is almost full. That drive has 10.10 installed. I want to replace the original and add a 240GB SSD and a 750GB disk drive. I want to create a fusion setup with these two volumes. My question is what’s a good strategy to get back to my current data? Will I be able to install 10....

Chosen Solution I have unplugged and plugged back in the TV. The tv will turn on , sound from playstation will come through and you can see the backlight of the TV is on. There is no picture though. I have unplugged the playstation from the TV and unplugged the TV and plugged back in still the same results @kristian93 try all the different video sources as well. If that does not make a difference then you most likely have an issue with the main board....

Chosen Solution Hi guys, I know this model has issues with the GPU and I have had it fixed by reflowing the GPU some years ago. But I think this may be different. It has a perfectly straight rectangle taking up around 20% of the bottom of the screen which is mostly showing an equal color shade of white, black, grey, sometimes with some colors faded into it from what it should show on that part of the screen....

Chosen Solution I had my screen replaced in July this year. The work was done in Central La. When I went to pick it up the tech was trying to show my something but the home button refused to work. So he changed it. Only this time the area around the home button does not respond to the touch. Most of the time I have to keep turning my iPad it’ll I find the right position....

Chosen Solution Last night battery was fully charged, put it in airplane mode and fell asleep.This morning worked fine, then all of a sudden the screen was black with horizontal green lines across. Then it went back to normal but some of the lighting would flicker. Was most noticeable wherever it was displaying something gray or white. Then it went back to straight black but when you tapped the screen the blue corner lights would still illuminate....

Chosen Solution Hi everyone, Please skip to bottom for shorter bullet-pointed fault details. I was using my iPhone 6 when the screen suddenly became banded with vertical stripes, they then became grey vertical stripes on a darker grey background, and the whole screen then faded to black. The phone was then dead - the mute button didn’t produce a buzz, etc. Would not turn back on. It was not recognised by the computer/iTunes....

Chosen Solution Hi. I replaced the screen on a friends iPhone 6s. After changing it, the screen wont come on (no backlight or anything. I did everything as stated and i know its not longscrew damage because it wouldnt come on even before i put the plate on. The phone is on as i can text it and it dings and makes a noise when i plug it into a charger....

Chosen Solution Sea water soaked, not turning on, what could be possible damages caused inside phone? Where can i fix in Phuket, Thailand? @nekx the major issue you will run into is corrosion damage. Salt Water will get your components to corrode very severely. The very first thing I would do is to disassemble it by following this guide Take a careful and close look at all components and connectors. Truly assess the damage....

Chosen Solution Just bought the new iFixit tool kit and the bits won’t stay in the handle, I feel like it should be magnetic. Or am I just being really dumb and not working out how it should be. Yes it should be. But there are several different handles. Here’s a post I put on the Meta site, take as look and tell us which one it is and if you have a piece missing: https://meta....

Chosen Solution Just installed IFIXIT’s display assembly and “slide to unlock” doesn’t work nor does the slide to power off function. Hard reset does work but just gets me back to . I received the phone with broken screen from my daughter who was using the “assertive touch feature. See whitish circle at 3 o’clock on photo of screen. Hitting that opens up choices but the hitting the icons doesn’t seem to do anything....

Chosen Solution My PS4 Pro had excellent performance before March of 2020. I bought it back in 2018 when a Black Friday sale was happening for red dead redemption 2 bundle with the pro. However after I updated my console to 7.50 back in March, everything started going down hill. It started off kind of minor. Short lags and freezes. They didn’t last long and I didn’t really care. As time went on, my console became worse....

Chosen Solution Well while repairing the inlet valve, I broke the auto soap dispenser. Can I get a breakdown of what this is supposed to look like? Thanks! David, take a look at the diagram. #17 is the dispenser. For more information, check on here Hope this helps, good luck. where can i get one..

Chosen Solution Hi, i recently bought the JBL Xtreme 2 this black friday and happened to come upon a problem. The speaker randomly cuts off all sound for maybe half a second to a second. I also want to add that i mostly use the aux so it is weird that this keeps happening So i was wondering if i missed a step when i set it up, and if you guys had answers to my problem...

Chosen Solution Spilled juice on the controller. It was working at first but then the lights on where the x is at in the middle of the controller faded and it just died so now the juice is dried and I don`t know what to do this guide will help you to get to the internal parts. Use this guide to help you clean it out. Orange juice has citric acid in it and will be gobbling away at all the parts....

Chosen Solution HI, Can i upgrade my 128 GB ssd by a 256GB third party manufacturer, like m.2 ssd with adapterto fit my mac. Thanks Sure. But the only ones you can use that I know of are the original Apple cards or the ones offered by OWC, such as these: https://eshop.macsales.com/upgrades/macb… For using an adapter, No. You will need to use the proprietary SSD that physically fits with that model of your MacBook....