Chosen Solution After installing the Samsung 840 EVO SSD exactly as per the instructions, I booted up the MAC MINI and the drive was visible, but needed formatting to OSX extended (journaled) in order for me to then install OSX on it and then migrate the old HD system and apps to it. However, when I try formatting the 840, I keep getting a formatting error: Disk Erase failed with the error: File system formatter failed....
Chosen Solution A pencil got stuck between the screen and keyboard and I shut it and now the screen has a black mark and is a bunch of different colors what do I do? Hi, Here is a link to the service manual for your Ideapad. On p.62 it details the pre-requisites and procedures necessary to remove the LCD panel. To install the new panel just reverse the procedure. https://download.lenovo.com/consumer/mob… On p....
Chosen Solution I have a pair of Beats mixr headphones with the aux cable soldered straight to the speaker (don’t know why). A wire from the wider cable and a wire from the aux cable have deattached and I would like to see a tear down to see where to re-solder the wires onto the speaker. I can’t take out the Monster cable (it’s actually a genuine cable), and one ear works....
Chosen Solution I have just started to have problems with my fseventsd using a lot of memory and CPU. Apparently this presages the death of the SSD:(. I am hoping to get a new M1 MacBook Pro next month but I’d like to keep the old machine going for as long as I can if possible. I bought one of the first Retina MBPs in 2012 with only a 256GB SSD....
Chosen Solution MacBook Pro 17" Unibody Late 2011 I cannot get to the desktop. It is in a constant reboot until I push the power key to force it to shut down Do an SMC reset: Shut down the Mac. Disconnect the MagSafe power adapter from the Mac. Remove the battery. (Learn about removing the battery in MacBook and MacBook Pro computers.) Press and hold the power button for 5 seconds....
Chosen Solution Sir our lg tv 55lv340c suddenly shutdown and and cannot be turn on again. There is red light when you plug but when you turn on it will not open. Pls help us sir ‘’’++@balegipto++’’’ let us know if the right light only comes on or if it blinks in a pattern. This could be important. Try a reset by removing all the inputs and then the power cord....
Chosen Solution My battery life was getting shorter so I ordered a new battery and replaced it with no issues at all. Put everything back together, plugged it back in and the iOS Yosemite took a very long time to boot up. Then after booting up the top menus didn’t display for several minutes. The mouse is lagging horribly and programs take forever to load. I have tried rebooting it a few times and no change....
Chosen Solution Hi, after just starting the contact “without turning on the engine” the temperature gauge needle starting to raise and stop on the middle, and after starting the engine the needle starting to raise immediately until reaching the H mark in a matter of seconds, is the problem in the temperature gauge itself or in something else!! Find and replace the sending unit on the engine. If problem persists you may need a new temperature gauge....
Chosen Solution On the top of the radiator is a small plastic connection of which a hose connecting the radiator with the coolant expansion tank. this hose is small and is connected above a larger hose to a small plastic nipple the hose is connected to and clamped on. the neck of the nipple broke off, leaving a hole where coolant pours out. Is this a separate part or can it be fixed?...
Chosen Solution My screen right section shows up coloured lines or black (i believe it takes the colours from other parts of the screen) and draw them as lines on the right section of the screen If i move the screen back and forth or push it hard it might come back for a while and then after sometime it flickers and go away My laptop has integrated graphics and the problem starts very early in boot up with toshiba logo so am not suspecting driver issues A video of the problem is here https://m....
Chosen Solution How can fix my airpods right side which is not working even lights are not bilnk of that side even its full charged Hello, Tanya. These sound like bootleg or counterfeit AirPods, as official Apple AirPods have no such LED, just one on the case. There isn’t much you can do in this scenario, maybe contact the manufacturer.
Chosen Solution I have Q mobile i7i . I could not open me camera it says camera can not connect It appears this phone is only available in Pakistan so I would advise getting help on it locally.
Chosen Solution I received my MacBook Pro 16 today and I was disappointed to see it scratched in the top-left corner: Admittedly, it travelled a long way: from Texas, US to Romania. The package was shipped with USPS and the MacBook was in the original Apple box. The obvious explanation is that USPS messed up and the scratch was caused by the bumps that went into on and off-loading the package to and from airplanes....
Chosen Solution I replaced the LCD/digitizer turned on the phone everything was workinig. I used it for the next 30 minutes or so and then all of a sudden screen goes black and no response from the phone? could i have a faulty digitizer? I could see a little light in display but nothing would happen. tried reset and then it went completely black? Since you’ve double checked your connections. Let’s try a force restart How to Force Restart an iPhone 5...
Chosen Solution I took an iphone 4S apart and had the screws organized and taped on a piece of paper and I lost the paper. I purchased the iPhone 4S screw set but I am not sure of the locations of the screws. I was wondering if I can get a diagram for the screw exact locations. If you follow a guide such as Installing iPhone 4S Display Assembly in reverse, you will be able to identify and measure the screws as you put the phone back together....
Chosen Solution MacBook Pro 15" Retina Early 2013 Is it possible to put a completely different logic board into the machine? I don’t want to repair (again) the old logic board and I am suffering of GPU panic as soon as the logic board switches from integrated to discrete. I tried repairing one time and the problem is still present (less frequent). My question: can I purchase a new logic board (Late 2013?...
Chosen Solution Yea as ov yesterday its playing rite up won’t load apps, chrome, play store, earth or anything. It let’s u press it & looks like it’s loading it then says not responding. Hav tried on & off and holding the power button down, hav deleted cache on apps and forced stop on sum apps, nothing working, Hi cks101 ! I had the same problem with that tablet. For to solve the problem, a reset of factory is necessary....
Chosen Solution Is it possible to use the S3 screen and digitizer to temporarily repair the S4 due to a broken screen and digitizer? I have a working S3 and a broken digitizer on my S4. I have data i wish to retrieve from the S4 but it is locked with a passcode and since the screen wont function i cannot input the code to unlock it. Therefore i thought i may be able to economise and use the S3 screen to unlock the S4 to get the data off it....
Chosen Solution I am having an annoying and a frequent problem when I save files in Corel Draw 8. The problem is that many a times I save a file, a cannot reopen either the original as well the backup file. I get a message - error reading .cdr file. I use winXP as OS. This sounds like a Hard Drive problem. Perhaps the file is being written on bad sectors of your disk....
Chosen Solution Just bought a TI-36x Pro, I have a problem when converting temperatures convert 0C = 32F okay convert -1C = -33.8F not okay convert -1F = 17.22C just not possible has anyone else noticed this bug??? or can confirm it??? how does one report a buy to TI?? I could not find anything on the web thanks for the help the problem is that negative number must be in ( ) enter (-1) F to get -18....
