Posts

Chosen Solution Here’s a video on replacing the springs, I can’t tell from the description if it is the springs or the bearings or both: https://www.youtube.com/watch?v=NfTpqGI5… UPDATE This might solve the problem: http://www.partselect.com/Models/WTW6700… @tabitha looks like this model washer does not use springs for the suspension of the drum. It uses suspension rods like these. Make sure that the plastic suspension balls for the rods are properly installed and in place....

Chosen Solution Ok, here’s the deal. I have this MacBook Pro, it had a bad battery so I ordered a new one (cheap China version). I put it in and did not get recognized. Opened up the machine again and took my goggles on and saw some corrosion where the battery connector is, as well as where the USB, Ethernet connections are. So I used a electronic cleaning spray to remove it and used a coffee filter to take off the spray....

Chosen Solution My macbook pro early 2011 - A1278 has a broken keyboard due to liquid damage. I want to replace the upper case with keyboard but I can only find upper cases with a US keyboard (horizontal ‘enter’ key) whereas my current macbook has the EN International keyboard layout (vertical ‘enter’ + extra key between ‘z’ and ‘left shift’). Is it still possible to do this replacement and have the macbook recognise the different layout?...

Chosen Solution Hi, My iPhone is throwing temperature warnings. I just wanted to check my log under analytics. Can you help me how does the temperature warning analytics look like or with what title does the log gets recorded in my phone. I agree with Cartersville, this is a brand new top-of-the-line, flagship device. You shouldn’t be wasting any time trying to troubleshoot this yourself (unless it is physically damaged, in which case Apple could refuse warranty)....

Chosen Solution Greetings, I have a problem with my Iphone 4s, black 16Gb from Sprint: Ever since I replaced the digitizer/screen the sleep/wake button (on top of the device) is not working. I can feel and hear the click of the button press and the proximity sensor works since it goes black when I make a call and my face is close to the device, but the button itself does not function....

Chosen Solution Hi guys, my question is if i can fix this (GPS antenna) without replacing mobo. Thanks AP It should be repairable but a board level repair on an iPhone 5 would probably cost more than replacing the whole phone.

Chosen Solution My time cutter zero turn will run fine. However, the blades will not stay engaged. I will be mowing and the blades will just shut off. I push the switch button down and pull it back up and they engage again. The engine does not stall or react. I am assuming the switch is bad, but before I start chucking money, I figured I’d ask. Some days are worse than others....

Chosen Solution Hi, Recently the PSU on my ps4 pro blew (popped cap) so I got a new one, the previous PS4 pro had the ADP-300P1A PSU in and my new one has the ADP-300CR. The new console was being very loud so i decided to swap the PSUs around but it appears that the small connector cable for each is different so I can’t swap them between consoles, does anyone have experience of this?...

Chosen Solution The Q,W & E keys are not working, confirmed with keyboard viewer. The Macbook Air will only works normally when any 1 of the working keys is pressed at all time, from the bootup. Otherwise, it’ll shut itself down after a few seconds, even during the booting. I’d removed the flex cable of the keyboard, and cold start works fine. I’d done SMC,PRAM/NVRAM, but problem still persist. I’m kind of think it’s the faulty keyboard issue....

Chosen Solution I dropped my Galaxy Grand 2 (3g) in water. I removed it immediately,and dried it as best as i could,and it worked.But after a few days,the screen flickered/dimmed automatically and switched itself off on its own for irregular intervals of time. When i gave it to a technician to fix it, it did get fixed,but in the process ALL OF MY DATA(photos,videos,downloaded apps) everything got erased(?)/disappeared (most of it was in the phone memory)....

Chosen Solution I have an iPad Pro from a customer who stated that the iPad would not power up. All original, never opened. Customer stated that she put the iPad on charge one night, and the next morning, the screen was black. She did not have access to iTunes. She also said that the iPad was NOT dropped and not wet. I took the iPad, connected to iTunes, which recognized device in restore mode....

Chosen Solution a red light has come on the cycle signal and none of the other buttons work. Nothing will work on the machine HELP See the answer Old Turkey and I gave here: “Contol locked” light is on. Nothing else responds..

Chosen Solution I am wondering if it would be possible to upgrade my Early 2011 Macbook Pros logic board to a mid 2012 or late 2011 i7 logic board. Has anyone done this with positive results? Would it be a good idea? Many thanks in advance. Yes, you can upgrade your Macbook with a later logic board from 2012, i5 or i7 would both be suitable. It’s a good choice in my opinion as 2012 boards are ready for upgrade to Mojave and its new graphics requirements and that will increase the value of your Mac irrespective if you’re interested in updating it or not....

Chosen Solution Hello, My early 2013 Macbook Pro will be turning 5 in March, and has had intermittent problems with the fans since I bought it. In its first year, the fans would be super loud and rev up violently, suddenly - that problem was resolved under AppleCare. Since then, the fans have always seemed unusually loud, but I always just sort of dealt with it. Earlier this year, the right fan started to rev up to an almost deafening degree (like a blender), randomly....

Chosen Solution MacBook Air 13 Mid 2011 Is it possible to get Phillips screw replacements for the pentalobe screws on the bottom case of an Air? Here’s the screwdriver for $5.91 that you’re trying to get around: P5 Pentalobe Screwdriver Retina MacBook Pro and Air Here’s the bottom screw set (Pentalobe): MacBook Air 13" (Late 2010-2017) Lower Case Screw Set Sure it’s possible… It would be very expensive! You would need to take all of the screws out and carefully measure each one then lookup and order (in bulk 5,000/10,000 per type) from a screw manufacture....

Chosen Solution I have a mid 2010 Mac Mini. I’ve only worked on full size PC’s and I’m trying to figure out what fits. I want to install a, SAMSUNG 850 EVO MZ-75E500B/AM 2.5" 500GB to boot, and a Seagate 2TB Laptop HDD 2.5" SATA 6Gb/s 32MB for storage. Will the mini recognize a 2TB drive? Can they both fit without removing the optical drive? If so is what is the preferred location for the boot drive?...

Chosen Solution Hello, I have an old note 3 that took a hard fall and the screen broke. The phone never turned back on after that at all. Not just the screen, but the whole phone would not turn on. When plugged into a computer via usb cable, nothing happens. I took it apart and inspected the motherboard, it looks to be fine and intact. no cracks or anything. what is the best way to recover the data on the phone?...

Chosen Solution I have an iPhone SE that got dunked into the Caribbean a few years ago. The display never turned on since, but I just realized that there are pictures on it that I would really love to have again. I took it apart and tried a replacement screen, but it stayed off while iTunes recognized it. I’ve bathed it in Isopropyl Alcohol and scrubbed it with a toothbrush, but still no dice....

Chosen Solution Frozen screen. Will not leave phone.pairing option. Hi! What you have to do is rather simple: Press and hold the Power and Action buttons on the Microsoft Band for about 10 seconds. The screen will turn off. Connect the Band to the USB cable to turn it back on. That’s it!

Chosen Solution It is not as bad as it seems. All the large rectangles on the edges are anchor points meant to keep the tray in place. Don’t worry about those for now. As for the rest, you don’t see trace becaude they are via points which means they go into the layers of the motherboard. I would reccomend to solder a micro wire on the solder points that you see in the pads and then solder the pins of the reader to the wires....