Chosen Solution Hi everyone! I have a dead thunderfly dead inside my screen and I cannot remove it…. Rebooting won’t work (LOL). Is it possible to even remove it? If yes, how? :) Thank you very much! This shows how to disassemble your laptop: ASUS GL752VW-DH74 Screen Replacement
Chosen Solution I have found a screw that has done the job for me. I got the M3-0.5 x 10mm flat head phillips screw, which fits perfectly. I didn’t need a spacer either. The screw did the job on it’s own. Hope that helps This is the screw I replaced the original stock screw inside the ssd bay that holds down the ssd. Update (06/05/2022) This is the original screw that came with the ps5 that I damaged....
Chosen Solution Hi all, My macbook air stopped working this morning, on startup it shows a file folder with a question mark flashing. I’ve tried command R but I then get a lock symbol and a password prompt. I’ve tried my log in password but that’s not working, could this be an admin password? I’ve never set up an admin password (at least I don’t think i have) so I have no idea what this could be, is there a way around this?...
Chosen Solution A few years ago we bought a radio controlled analogue clock for my elderly mother-in-law which sets itself automatically from the MSF Rugby time signal. It seems to be this one: http://www.argos.co.uk/product/2552790 It successfully reset itself to Summer Time when the clocks went forward, but is now showing the time plus an additional hour. There’s a “REC” button on the back which causes it to re-sync with Rugby, and when I pressed that it did indeed resync, but again, to an hour fast....
Chosen Solution I’ve the Macbook Pro late 2008 and it has the 4 hr battery (removable). I would like replaced it with the new 8 hr battery (not removable) If I need more space, I can remove express card or mid wall. …the body is the same … Is it possible??? Thanks!!! If the part numbers match they’ll fit. If not get the right one. Simply changing batteries will not give you longer use....
Chosen Solution Is removing the processor drawer as simple as unlatching it and pulling it out or are their connectors to disconnect first. I think I need to pull it to add the tiny WiFi card to the mother board. I can see it and install the card but hooking up the antenna is going to require removing the processor drawer (??). Lynn Bennett, here are the steps the remove the processor tray: First Steps Open computer and lay it down with access side facing up....
Chosen Solution I replaced the logic board, everything works fine except for it wont charge, no light on magsafe, changed magsafe 3 times still no charge. Try disconnecting from the logic board all and every connector and battery and see if that brings back the green light to magsafe. If it doesn’t it’s very likely you have a faulty logic board. If green light gets back start reconnecting parts one by one until you find yourself back with no green light that will signal the faulty and probably shorted part....
Chosen Solution It’s all one piece now. Great care must be taken when removing it. The tool is almost mandatory. m Here’s how it’s done: iMac Intel 27" EMC 2546 Display Replacement
Chosen Solution My MacBook computer screen will turn on fine and then it might go black, but then when I push screen back more or forward more it will turn back on. Any help would be nice. Thank you. This sounds like one of the inverter cables is damaged. These sometimes get pinched in the hinge. That a lokk at step #8 of this guide: MacBook Core 2 Duo LCD & Inverter A1181 (fast method) Replacement Here’s an extended guide for replacing them: MacBook Core 2 Duo Inverter Cable Replacement...
Chosen Solution what is causing this? its phantom touches? Has this tablet been dropped or repaired? It’s definitely a touch issue with the digitizer itself. These issues can be software related, but they rarely are. Is there a warranty left on it by chance? I know a lot of repair shops that dont touch tablets like this because they are either not worth fixing since the repair may cost the same or more than a replacement or the parts are hard to find....
Chosen Solution iPhone 6 IOS 11 When I plug my phone in to charge the touch screen becomes problematic. I can attempt to type something and it will hit random keys and open different pages randomly sometimes other apps. It seems to be more on the right hand side of the screen. This started after I upgraded to IOS 11 and only happens while it’s plugged in. I had an iPhone 6 for years on iOS 10 and never had this issue before iOS 11....
Chosen Solution My 2005 Pont. Grand Am, has developed a sulfur smell and just started to die when slowing down to turn. How bad is it, time to trade cars or what possibly? Liz The smell is caused by un-burnt fuel going through your catalytic converter or possibly you have a bad catalytic converter…which is warrantied for 80,000 miles. If it is just un-burnt fuel then you probably have a misfire in one or more of your cylinders which explains the loss of power....
Chosen Solution while on safari i keep getting the rainbow spinning wheel do you think i have to replace the hard drive? i have a macbook (13" alum late 2008) / with my apple care expired I would start be emptying Safari’s cache and reset it. Reboot your machine and see if that helps. If it doesn’t it can probably be a corrupt p-list file or a permissions problem, and the easiest way to resolve that is to completely delete Safari and reboot and reinstall/ repair permissions....
Chosen Solution I am trying to sync my airpods pro with my iphone after i hit forget by mistake. But when holding the sync button on the case, the light on the case won’t turn white. the case and airpods are fully charged and have tryed everithing and every process/method and still no white light Hi Here’s a couple things to try! Have you restarted your iPhone and forgotten the old AirPods Pro in settings(settings>Bluetooth>AirPods pro ( i )>forget this device Also are you sure they are charging,to confirm they are charged I would leave them on a wireless charger for a while Once tried the above try and pair them again and if it doesn’t work i think it’s time for a trip to the apple store or to contact apple support Hopefully this helps Any questions please ask Thanks:-)
Chosen Solution The chip on the board heats up when the phone is turned off. So the battery keeps discharging very rapidly (new battery). Help identify the chip on the picture please. Solved. It’s fan48623
Chosen Solution cannot be used to unlock this iPhone. not incorrect but as I said firstly cannot be used to unlock this iPhone. You won’t be able to used this it needs to be return or contact the person you bought that iphone from and ask to removed it from icloud.com in order for you to use the iPhone to save your data and be able to download apps. Then it is not the correct “iCloud Account”… for unlocking the phone....
Chosen Solution Mac mini Late 2012 - 2.3 ghz Core i7 , - The USB ports (all4) stopped working - after I plugged all the usb devices: scanner printers hard disks -around 10-11 devices- and they were all turned on and connected to the computer via self powered usb hub, and when I started the computer I had a (USB device drawing too much power) error message , and all the usb went down , I researched and did all the suggested solutions I tried resetting NVRAM/ PRAM , and SMC....
Chosen Solution Pioneer VSX-824-K HDMI light flashing nothing works. can it be fixed or should I replace? @rdbob, try to clear the error first. Plug the unit in and with the HDMI light flashing, press the power and the advanced surround button simultaneously and hold this combination for 5 seconds to clear the error. Should this not clear the error, you will have to open up your receiver and see if there is any visual damage....
Chosen Solution How do I put the clip holding the transmission to the body back in the screwdriver? It seems to get “stuck” 3/4 of the way in and I’m uncertain how much force I should use to put it back in. tonystark622, if we are talking about the clip shown in step 2 of this guide, it should be relatively easy to reinsert it. The clip is slightly bend on the ends and if the transmission and the body do not line up, it will not go in all the way down....
Chosen Solution By mistake inserted a SD card in the SIM slot. Saw the repair steps and it looks like this area is open just after the “slide of the Panel”. Can I access the SIM area to remove the SD card at this level? Yes, Slide the panel off and you should be able to retrieve the card. This is common with these and I have retrieved sim cards and SD cards from a few....
