Chosen Solution Hi, i’ve the following problem with my eye glasses: How Can I fix it? Hi @piero90 , Assuming that the two materials that need to be joined are metal and plastic of some sort, this link may be of some help.
Chosen Solution I had a guy come into my shop telling me his PS4 BR drive has a disk stuck in it… I disassembled the unit and found there was no disk in it, but there were a couple pieces that were flying around.. http://sjfm.us/temp/PS4.jpg The white piece on the left I found out where it goes. At least I am pretty sure it goes there.. The black piece on the left is a mystery....
Chosen Solution hi, how to reassembled the barrier assy. in sony cyber-shot dsc w 55? @vishat1 not sure what you are referring to with the barrier assembly. Check these guide Sony Cyber-shot DSC-W55 Repair to see what you are looking for.
Chosen Solution I can tell this subject has been beaten to death, but I can’t find one that addresses my particular issue. After replacing the digitizer, the backlight turns on every time, but only for a second. So the backlight works - but it won’t stay on. I’ve done all the reset tricks, disconnected battery 5 hours, etc., but the backlight only pops on for a moment (But it will turn on every single time)....
Chosen Solution I was replacing my screen when I found that a cable I’m pretty sure is important was torn at the sauter point and I don’t know exactly what it is or how to fix it. Here is a picture, please help That cable is responsible for providing the back-light on the display. You would have to re-solder that cable in order for the back-light to work.
Chosen Solution I have a macbook pro 2017 non-touch bar. Today I started up with all these screen lines and glitches. Until now i tried to reset pvram and smc but not worked at all. Even I tried to “safe boot” or diagnostic tool from apple but not detect anything an the problem still goes. Please someone can help me!! Thanks so much, This tearing effect is a scan issue within the T-CON unit which is part of the display assembly....
Chosen Solution I bought MacBook Pro 13" Retina (Late 2013-Early 2015) Keyboard from iFixit (US store) but its the wrong one. According to https://support.apple.com/en-us/HT201794 I need a Dutch layout, or at least English International. Where am I going to find this? It does not seem sold on iFixit (EU store). Sadly, the International English or Dutch keyboards are hard to find for this series. The best I can get you to is MacBook Pro 13" Keyboard - UK (L13/14/15), Apple P/N B661-8154....
Chosen Solution Some water got spilled on the keyboard and after a bit it started acting up. Some of the keys still work fine but some do weird things like if you press 1 it types 12 and 2 will also type 12 and 3 doesn’t work at all, it’s like this for the left side of the keyboard. I saw fixit sells a keyboard for this model but I couldn’t find installation instructions....
Chosen Solution After about a minute display starts blinking. Cannot access self diagnosis feature. I will open it up and have a look at the boards tomorrow. @mike8888 your panel is a LED backlight panel. If your Display actual appears to turn on and off and thus looks like it is blinking, you may have issues with the backlight array. Your TV should have an LD board and once you have your TV apart post some good pictures of your boards etc....
Chosen Solution I have a hardly used Sony CDP XA-5es that does not read CD. It will load, spin and then stop. A tech thought it could be the laser lens issue. Could anyone please help. Thanks, Rob Hi @nizora , As a first step, try using a lens cleaning disc - example only to see if that resolves the problem Update (05/11/2018) Hi @nizora, Here is a link to the service manual for your player....
Chosen Solution I’ve got this 2013 21.5” iMac, with a 256 GB SSD already, wanted to add a storage drive, but when I opened it up, I discovered no SATA or power cable, which isn’t surprising since it wasn’t necessary. Any guidance on obtaining such a cable? Here’s the needed iFixit guide iMac Intel 21.5" EMC 2638 Hard Drive Replacement You’ll the the adhesive kit and the wedge is also helpful!...
Chosen Solution hello i bought an iphone second hand and when i try to put it on the apple logo comes there for about 5 seconds and straight after that it goes to a black screen for about 20 seconds then goes off…i tried to connect it to a computer but it just discovers it as an apple phone but itunes did not find it….i have read that it may be the battery…please help me...
Chosen Solution The images on the screen suddenly went very dark. You could barely see the images, but looking closely could see they were there. I increased the backlight, the brightness and the color adjustments and the picture looks much better. My question is, how long can we expect the TV to continue operating with these greatly increased adjustments? The television was purchased on March 10, 2010. I realize TV’s don’t last like they used to, but am hoping this one is good for a while yet....
Chosen Solution The brown connector break one of the arms. I still have it, what should i to do fix battery cable? Update Dear Mr.Oldturkey03. I have to say a lot of thanks for your advice, and knowledge. “arigatougozaimasu” in Japanese.. I try to daiagnostic my iPod, then I look up a funny incident. My iPod has only 30GB, But diag says 289GB! I will tray to change HDD, and restore....
Chosen Solution I tried plugging in my gamecube controller when the insides of the plug popped out. ultimate, links below show how to replace controller port and tear down, you can search the net, ebay, amazon,etc., for a replacement controller port if required. Check the attached links,instruction and guides, Good luck. I hope this helped you out, if so let me know by pressing the helpful button. https://www.youtube.com/watch?v=9A2Qib_4… Nintendo GameCube Teardown http://www....
Chosen Solution i have just replaced the LCD on an ipad 3rd gen. I have completed the repair and now i have noticed that one side is darker in screen brightness to the other side. Why is this? How much darker? Can’t read it dark or just annoyingly dark? If its just a bit darker, it could be as simple as a screw or something else is stuck under the LCD causing it to look funny....
Chosen Solution hi,it powers on fine but,the display stays black.can you help me fix the problem?thank you in advance. Here are some possibilities If the monitor says not supported you want to hit F8 before boot to windows and go into enable vga mode. if it still doesnt show its the monitor and needs either replacement or try a different video cable. The other possibilities is that you updated the graphics driver and all you need to do is rollback the driver to a previous version....
Chosen Solution Hiii i am in need of a solution where i could connect my macbook pro to a thunderbolt display which is located about 2-3m away from the macbookpro. in the market there are only M-M thunderbolt cable with data/video transfering. as my understanding i need a M-F adapter in order to work this out. any ideas guy?? You just need a Thunderbolt extension cable like this one: http://www.ebay.com/itm/Solidmate-Mini-D…...
Chosen Solution So we tried to turn on our ps4 one day and it said cannot start ps4 connect controller with USB cable blah blah, we went through the whole reinstallation process and put the program on a usb drive and basically factory reset the ps4, it started working for a few minutes, I restarted it a few times and tried downloading a small app like YouTube, the ps4 was kinda laggy and froze every once in a while, I tried starting YouTube and the screen froze and the ps4 turned off....
Chosen Solution I own an Asus Memo Pad 8. I was just downloading random apks, when suddenly from one of the APKs….. random apps are being installed…. Most of them are Po*n apps. I factory reset my tablet but it still is installing. There are also some random pop-ups. Is there a way to fix it? I miss using my Tablet Why is it a bad thing? check if your Google account is used by someone else to download these stuff, maybe it syncs over....
