Posts

Chosen Solution The screen has begun to flicker after being turned on for a while (time varies, can be around 2 mins, 5 mins, 10 mins or 20 mins before it starts flickering). At first it flickers only at the bottom of the screen and gives the appearance of the bottom quarter of the screen jumping up and down. Then after a while (a further 3-30 mins) it stops doing that and the entire screen just flickers occasionally....

Chosen Solution I took apart my iPhone 3G and after putting it back together the screen assembly is uneven and will not snap in properly. The bottom right part of the screen is raised up and decreases in height (closer to being snapped in) towards the top. i can push down on it and it kind of bounces back to its ‘uneven’ position. if i push down the “plasma” in the screen gets distorted or white, like when you push on a computer screen....

Chosen Solution Hi, I’ve googled this all I can. I have an iPhone 6 that I wiped via 3uTools I’m now been stuck where it only shows the apple logo then turns off again. I’ve tried the home button and power button and different USB cables. I’ve tried a new battery and new charging port and still no avail. The phone isnt recognized with iTunes or 3uTools. What else can I do?...

Chosen Solution The phone will sometimes toggle no sim card and back to sim card present. how do i solve this? And also the sim card slot 2 is not working Hi James147, Already tried to blow some dust out ? Is the device up to date? If this is the case, you probably need to replace the SIM card readers. This will be difficult as it’s soldered on the motherboard....

Chosen Solution A friend has a MacBook Pro 13-inch with what seems to be a blown earphone jack. The speakers work and will even stop playing while a earphone jack is plugged in. The signal itself does not seem to be making it to the phone line though. We have confirmed this with multiple sets of head phones, so are pretty sure it is the jack. Any ideas? I know older models had a separate audio circuit, but so far I have not found it online....

Chosen Solution I replaced my dock and my button on the iphone 4. But now I only streaks of light on the screen. What can I do to fix this? You probably ruined the screen by damaging the screen cables. You need a new screen assembly. But I would instead use the money towards upgrading to a newer / faster model.

Chosen Solution After the release of ios11 I backed up my iPad on my MacBook Pro and downloaded the update. The update process started, and then the iPad restarted and I got an error in iTunes. The iPad stayed at the Apple logo and wouldn’t change. No big deal, I thought. I just backed up. Just restore and go from there. I did a hard restart, and the iPad loaded to recovery mode with the plug into iTunes information....

Chosen Solution So, I’ve had a bad habit of leaving a game running on my TV and walking away from it. This hasn’t caused any problems in the past until yesterday when I left the switch running animal crossing and stepped away to do some chores which took longer than expected. I came back a few hours later and found that when I went to turn on the switch again, the TV just showed a black screen....

Chosen Solution MAC OS Lion, system fail to boot. Boot Target Disk Mode, I can check all contents in the hard disk. Boot Single User mode, saying “I/O error”, but fsck is OK So I assume hard disk crash. Swap in a new 500G HD. Use USB drive for Lion Recovery Disk. It cannot see the new HD. Swap back the old disk, it can see it but fail in partitioning....

Chosen Solution My samsung Galaxy TabS keeps shutting down and restarting again by itself! the screen stops working first and multiple black transverse lines shown the the device restart alone by itself any suggestions or opinions please ? Sounds like your tablet is stuck in a boot loop. Samsung phones and tablets have bad power buttons and when they get stuck or brake they often do this loop. You can try tapping the power on button for a while or tapping the side of the phone gently on a soft surface to jar the stuck button free....

Chosen Solution I bought a TCL 55in 4K Roku TV about 3 months ago, and today while I was watching Netflix, it made a loud popping sound (like a breaker flipping) and then there was no power. I thought maybe my surge protector had flipped, but upon checking it everything was fine. I have tried unplugging the TV and plugging it back in, different power cords, even power cycling and nothing happens....

Chosen Solution Hello, the fan off my Lenovo Yoga 3 14 (80JH) is not turning off. When you start the Notebook the fan is turning on right away. I tried apps like “NoteBook FanControl” or “Speedfan” or “TPFanContol” all aren’t working. They detect the fan at 112% working, but all tries to reduce the fan speed are failing. I hope that someone can help me. Everything that I found on google couldn’t help me....

Chosen Solution People can barely hear me.is this a fault on the microphone maybe a software issue? Hi, Try using the earphones with the microphone attachment to make or receive a call. If the people can hear you OK when you use it then it proves that the voice transmission circuitry is OK and that you have a problem with the microphone. Check to see if the microphone hole on the bottom edge of the phone is not blocked with lint or dust, (use a strong light and a magnifying glass to see better)....

Chosen Solution Hi, my water dispenser always worked fine until recently. I stopped using it for about 2 years so it was sitting and not being used, though it was plugged in and powered on the whole time. I recently decided to start using it again, but I can’t get the water to come out. It did for a day or two after I started using it again but stopped for some reason....

Chosen Solution I have purchased the xbox 360 rrod fix kit and installed everything but i still have the rrod.. Please help me.. Hi Willemsesley, If you haven’t already, try using this guide to reflow the motherboard on your Xbox 360. It’s even worthwhile to try this before installing the RROD Fix Kit. It’s also worthwhile to check the new heat sinks and thermal pads to confirm that they’re seated correctly....

Chosen Solution I have a PS4 that, when the power button is touched, beeps once, flashes a blue light, then powers off. I can hear the power supply click on, and the fan powers on for about 2 seconds, then the power supply clicks again and it shuts off. It doesn’t give me a chance to hold down the power button long enough to enter “Safe Mode”. I’ve tried a different power supply from a working PS4, but it did the same thing…even tried a different Blueray drive and hard drive, no dice....

Chosen Solution I’m putting back together my MacBook that I replaced the LCD on and now I am looking at two pieces to which I don’t know how they go back together.. if anyone would be ablidged to help me out I have pictures of the pieces that I’m talking about… it’s like two small white pieces that come apart into more small pieces, on top of that I don’t see in the manual where they go....

Chosen Solution My Yamaha keyboard had a loud key. So I dismantled the the keyboard to wipe of any dust stuck inside the key contacts. After cleaning the particular keys. I found that 4 keys were not working from the last octave. So again I wiped the particular dead keys. After that manys keys were not working all over the keyboard. These unplayable keys are running every where in the keyboard....

Chosen Solution Hey, I have recently purchased a damaged Iphone 8, which wasn’t supposed to turn on. I noticed that the battery connection was bad, so I replaced it. The phone automatically attempted to turn on several times with approximately 30 seconds to 1 minute apart, until it successfully boot up. When turned on, the phone works perfectly. The screen and the home button has been replaced (With the home button not being functional of course)....

Chosen Solution Dryer heats up fine it does sparatically shut itself off, and has a steady, rapid, very loud metal on metal banging. Cause 1 Drive Belt The drive belt is a very long, slender belt that wraps all the way around the dryer drum, around a tension pulley, and then around the drive motor. Over time, the drive belt can become frayed or otherwise damaged. If the drive belt is frayed or damaged, the dryer will be noisy as it turns....