Chosen Solution Hey, I’m looking to replace the center hinge cover(think this is what its called) on my HP EliteBook 830. Has anyone replaced this before? i think the screen may need to come out but not sure. If anyone has a part number that would be great :) Hi @philm1996 , Here’s a link to the service manual for the laptop. Scroll to p.71 to view the necessary pre-requisite steps and then the procedure to remove the display assembly....
Chosen Solution replaced the battery and every thing seem to go to great. plugged the phone into electric charger and the apple screen came on then sated plug into iTunes so I did this the apple screen appeared again. itunes opened and said the phone needed to be restored. I clicked restore it downloaded the software then sated preparing to restore phone. it runs a few minutes then states there was and error 1604....
Chosen Solution Hi – I replaced the superdrive in my mac mini and it’s still not accepting CDs. Maybe the drive I got is also bad, but I’m wondering if maybe I should do the cable next? What was the source of your part? Go under the Apple to about this Mac > more info or system report > Disk Burning and see if the drive is even being seen.
Chosen Solution Where can I find replacement keys (with a butterfly mechanics) or full keyboard for my MacBook Pro 13" A1708 (late 2016)? Check here and see if these will work for you: https://www.replacementlaptopkeys.com/ma… Also one of our contributors may have these now: Jon Ridley @thebookyard http://www.thebookyard.com/apple-retina-… Can you tell us what happened here. Sadly, in this case Apple is the still the only source for parts. Mostly, AppleCare covers issues under warranty....
Chosen Solution Hi I need to replace the fpc connector in picture wondering if anyone knows the name of connector. Also I have a 858d soldering station and wondering best heat and air flow to replace this part on screenshot. Thanks Update (12/06/2021) screenshot @spiderjocky12 that is reference designator HEA7000 and the Samsung part number for that is 3711-009408. Available at places like this and here as well I am certain there are many more p[laces out there....
Chosen Solution I have been trying to restore my Satellite C850-F211, but it doesnt seem to complete. Its like there are 47 steps to complete but its stuck on 27/47 and for more than 6hours, it displayed ‘Setup is preparing your computer for first use’..https://drive.google.com/folderview?id=0… Hi, First of all, remove the picture with the Windows product key! Not a problem if you turn off and on the computer (restart) because this is the finale phase....
Chosen Solution I was trying to replace the screen on my friends iPhone 6s. The screen was extremely shattered as it was. I tried taking the screen off using a heat gun, suction, and some prying tools and the bottom part of the screen (all of the white area including the home button) ripped off from the LCD part of the screen. I am wondering if i can replace this cable/the home button at all....
Chosen Solution I recently bought a Craftsman lawn tractor from an individual and the deck belt needs to be changed. However the routing diagram is missing. Anyone have it? Model 917.27690 @scarecrowndem7 page 26 of the operators manual shows how to route the belt 91727690_operators_manual.pdf Quick picture just in case you can’t get to the manual
Chosen Solution The dryer shuts off after a couple of minutes on normal setting but will run on timed dry. It doesn’t get hot on timed dry. I have cleand the lint out. I was thinking that it was the heating element but I am not sure if that is the problem with it shutting off. I don’t want to waste money on parts if I don’t have too. Any thoughts?...
Chosen Solution I have an iPhone 5c that was water damaged. The phone boots to home screen, however the screen does not respond to touch. There is a bit of corrosion on the screen connector. After I clean the corrosion, if the problem persists, is there a way to know if it is just the screen or a board level problem? Thanks! Clean the connector. If that doesn’t work, try a different display....
Chosen Solution My friend shattered their OnePlus 9 screen. What would be the best route to fix this? Should I wait for iFixit to make guides or see how much OnePlus charges to replace it? ive been scavenging around google and havent been able to find any yet. mainly because the phone came out last month. if they have insurance id suggest going that route or sending it to a screen repair place because acquiring a screen for this right now is going to be interesting....
Chosen Solution Hi there, I have a 5S that needed a new screen. I replaced this and it was perfect for a week or so then the bottom part of the screen became unresponsive. I opened the phone and replaced it again (assuming it was a faulty part). Now the phone turns on showing the apple logo and then goes black. The screen is lighting up as the backlight is showing but there is nothing else and no sound....
Chosen Solution Hi, I intend to buy a MacBook Pro but do not want to pay too much for it. So my intention is to buy the smallest configuration and upgrade it myself. So far my investigations delivered the following infos: 13" - RAM not extendable or only with a 7.000 $ device => thus buy 16GB from the very beginning SSD: Transcend offers Jet Drive Lite (SDcard) for upto 128GB for about 83€ street price, 95MB/s read, 60MB/s write speed Transcend does not offer their Jet Drive 7xx serie SSDs for MBP later than early 2013, thus it may take another 2 years before they hit the market with devices that match MBP 2015 devices, if they do it at all and if there is no firmware issue (Apple adds proprietary FW to their SSDs)....
Chosen Solution I have a Imac 27 inch with emc 2546. The issue we are having is that it is really slow and I also noticed the fan is running fast. The usual steps have been done, PRAM.SMC resets ,reload, and even tested memory. I replaced memory with known good memory. Nothing helps and it is still running slow. I even tried to run it with a external drive and it is still slow and the fan runs fast....
Chosen Solution I have new speakers, 2 woofersand 2 tweeters. These connect to the passive crossover that came with them. The passive crossover input is 2 wires and it says ‘Amp’ on it. I don’t have an amp and I’d like to avoid buying one if possible. I also have two lengths of 2.5m good quality car speaker wire. On my head unit is a left and right RCA output. My idea is to splice an RCA-aux cable with my speaker wire (so cutting the aux off if that would work) and connect the speaker wire to the ‘Amp’ input on the passive crossover....
Chosen Solution Is ist possible to put a SSD instead of the Superdrive? (perhaps with an Optibay?) Is there a tutorial on the net ? thx Here is one persons solution. Will it work for you–read and decide. Good luck–Ralph http://forums.macnn.com/58/iMac-eMac-and… hey thx! i think i will put a 2,5" HDD with an Optibay instead of the Superdrive and replace the old 3,5" HDD with a SSD (Intel). worked for me....
Chosen Solution My PS3 model CECH-2501A at first kept turning off after 3 sec. I changed the power supply, still had the same problem. Changed the mother board. Powered on good however, no connection. I get a Dark Screen with: “Device could not be accessed. Please check the cable connection and device settings.” I checked the HDMI cable, even changed it, still getting the same response. The system will not boot up to the PS3 blue screen....
Chosen Solution Can I get a new control button Maureen, contact Fitbit through link below, they may be able to give you a resolution or put it through as warranty. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. http://help.fitbit.com/?cu=1
Chosen Solution The microwave doesn’t functions if I press a button on it. In assistance they told me that the card is not working anymore, is there a way to fix it? You REALLY REALLY need to know what you’re doing to work on a microwave as there are voltages inside which are far more dangerous even than live mains. But it’s not too clear from your question what the problem is....
Chosen Solution Hello Everybody. My A1302 Model internal Hard Drive is soon going to RIP (keep getting constant errors that the Disk Image can’t be created / Is damaged ) so a drive replacement is imminent. My question is, would it be wise to replace the internal drive with an SSD ? Or should I stick with a standard HDD ? The old drive is a 1TB and i’m going to use a 1TB drive as a replacement....
