Chosen Solution it not comeing on and yes it is fully charged If all else fails you can try a hard reset which will wipe all your data and start you from new. This is done by pressing the start button and the up volume button at the same time . Hold them both down till the machine starts . you will see probably the android and then a selection menu ....
Chosen Solution Hello! I have been having problems with my PS4 Gold Headset. The speaker is coming out of the socket. I have provided photos of the incident. Should I just pull out the Speaker and try to put it back in? What do I do?? Hi! As you can see in the 3rd picture, it’s held by plastic clips. Make sure nothing is blocking and press it straight back in....
Chosen Solution Hi, Mint condition red iPhone 8 iOS 13.1.3 , had a dead battery which we replaced with a new battery and the phone worked fine for multiple days. Phone randomly rebooted and now will work perfectly just reboots itself at random intervals. Ive tried a different OEM battery, known good and it does the same behavior. I tested the battery connector for the correct meter readings and the readings match my known good iPhone 8 boards....
Chosen Solution Rear camera glass shattered. Can I get a replacement glass for this? I have insurance but don’t want to use because it will cost $150. If I could get the glass, I can replace it myself. I can’t seem to find the rear camera glass to fit this Moto Z Force. Help ?? Karen Jacobson, Maryanne Harvey, Moto Z camera lens replacement, video link below should help in the replacement of the glass/lens and link to replacement lens, which you can also do a search on for perhaps better pricing....
Chosen Solution Replaced my old battery with one from ifixit about 2 years ago. Trackpad clicker stopped working and realised that it was due to a swollen battery. However, the battery status shows normal as well as it charges and functions normally. I always remove the power after my battery has been charged fully, so there is no chance of overcharging/overheating. May I know the reasons for swelling? Could it be due to the battery being of a 3rd party product?...
Chosen Solution There is a red light that is appearing at the top. Does that mean a battery needs to be charged? If so how do I find it? Hi @peg1 Yes. If the top light is red it means that the rechargeable battery is low and needs to be recharged. Here’s a link to the user manual for the toothbrush. Go to the Section entitled Connecting and Charging for more information...
Chosen Solution I had a broken rear camera and replaced it at a service center. They tried 4 different working cameras from working phones, they even replaced one in front of me, but no matter what, it focuses only in the distance. I used procam to check, and sure enough the infinity focus is off too. What can it be, if the camera module is not an issue?? It doesn’t focus close, only far away....
Chosen Solution I have found that the mini usb port on my Samsung G3 Station had disconnected/been ripped off. After removing the enclosure I have unplugged what seems to be an mSATA converter or something (pictured) and now I need to replace it. Where abouts would I be able to obtain a fairly cheap replacement part in Australia? Item specifics: “Converter” - G3 Station 3.5" REVO.4 20100204 Hard Drive - Samsung HD154UI 1500GB +12V/+5V, 0....
Chosen Solution I need to to replace the 2 fans, speakers and heat sink on the new logo board I bought from ifixit (it didn’t say it didn’t include those parts…) do these part come with screws or do I need to buy those seperately? Thanks Munro Most parts do not include screws, see if there is a separate listing for those. If not they can generally be found on eBay....
Chosen Solution Replace power window motor Hey, Chris. To access your window motor you’ll need to remove the door panel. Here’s a link to a video of someone removing the door panel and window motor of a similar vintage truck. This video is for the driver’s side door, but the steps will be the same for the passenger side other than a different switch assembly. Unfortunately, it’s possible that your window regulator is either welded or riveted in place, and will need to be drilled out....
Chosen Solution My screen is broken and cannot be unlocked to retrieve data. I have exhausted all other potential options. I do not care if the screen is a permanent fix all I want is an affordable option to use a compatible screen that can access data then wipe and recycle phone, even if it can only work by using a flex cable. I need to know if there are any lcd/digitizers from other models that use the same plug as the s7 active....
Chosen Solution Is it possible to fix a phone that was broken few years ago because sea salt water got inside? Hi @zhanibek , By now it most probably has been corroded beyond all recovery. Sea water is very corrosive. Use the Xiaomi Mi Note Repair guides to open the phone to see what condition it is in. The battery will definitely have to be replaced as no doubt after all this time it will have been depleted beyond recovery....
Chosen Solution I’m getting an iPhone X tomorrow from a friend. He says that the touch screen has no functionality at all. The glass is in great condition, the OLED completely works, and the phone has never been opened. What do you think my next steps would be? Could by some miracle it be just a simple re-seat of the connectors? Edit: I think the phone was dropped once, and the camera glass is broken....
Chosen Solution Mid-2012 rMBP 2.7 So I thought every so often I hit a hot (sleep) corner or something but the laptop wouldn’t turn the screen back on with any keystroke or power button. That said, if you held a random key down, you’d hear the “sound” of holding a key down so obviously the laptop was still on. It would take a full restart to get the screen to function again....
Chosen Solution Replaced iphone battery, but now the screen doesn’t respond to touch. When I first turned on after the new battery, the screen looked a little blocky, but that quickly deteriorated into just a grid of grey and black squares, and then finally just a few vertical lines. I imagine that there is some issue with the connection between the screen and the phone, but am wondering how best to assure that a proper connection is made....
Chosen Solution At only 4GB of RAM, it seems like my Ideapad can hardly do anything heavy-duty. Whenever I’m online, everything slows to a crawl, no matter which browser I use (Safari, Firefox, Chrome). I don’t believe this is a Wi-Fi issue, as the problem only gets worse when I open programs such as Photoshop and Premiere Pro, causing the entire computer to crash. I want to replace the 4GB RAM with a larger one, but I’m not sure if that’s the right course of action....
Chosen Solution Hello, I have either the mid 2012, or mid 2013 model, I can’t check now. I’ve tried to connect an external DVD reader/writer external drive thingy. My system did not recognise it when plugged via USB, and I’ve tried plugging in the power adapter to the DVD drive. The moment I’ve plugged the adapter to the external drive, my screen went black. I thought, my battery might have gone dead, so I’ve connected my charger....
Chosen Solution I’m intrested in buying a used 2013 macbook pro 13" but the seller states that sound does not work with internal speakers or 3.5mm headphone jack. So the the question is can this be fixed or is there a sound card I could replace? The sound chip and sound ports are integrated into the motherboard. Unless you know how to solder and what chip and ports to solder, I would take caution....
Chosen Solution Recently bought a OCZ Trion 150 SSD 480GB and cloned my existing HDD using superduper then tried carbon copy and both worked fine. When I instal the SSD inside my MacBook Pro 13 2009 and connect it via SATA and try to boot the SSD cannot be found. If we review your systems specs we see your SATA port is only SATA II (3.0 Gb/s). Now if we look at your SSD we see its a fixed speed SATA III (6....
Chosen Solution Hello, Starting my MacBook Pro only produces a partial boing, which is repeated after a few seconds over and over again. Meanwhile nothing appears on the screen, it stays black. It’s no different whether I try to start from battery power of from AC power. Connecting the power adapter gives me, at first a green light, which turns to orange after a few seconds. What might cause this problem?...
