Chosen Solution Model: LN52C530F1FXZC When we first got this TV(used), it worked fine for a few days, then stopped. After some initial troubleshooting, I left it unplugged for about 3-4 days and then it started to work fine again but after about an hour or so, flickers and goes black again. When I unplug the main board from the power supply, the backlight LED flickers on for a second then off completely....
Chosen Solution I bought a 2011 iMac used knowing that there was a problem with it “shutting off at random times” and I thought I could simply replace the power supply. After receiving the computer I noticed that the only thing that’s shutting off was the backlight because I could shine a flashlight at the screen and the computer was working fine. I then replaced the led backlight control board, but the problem persists....
Chosen Solution Have had a screen changed by unauthorised repair shop. However now it is really hard to use the phone. Have to press hard/numerous times on stuff to select. Is this a setting issue or should I bite the bullet and get authorised screen change? This is a calibration issue, only Apple can individually calibrate the screen, it is not possible to change any settings. Take it back, sounds like a poor quality screen or bad screen, they should change for you....
Chosen Solution I replaced the front panel on an iPhone 6 Plus last night. I tested the LCD before installing all of the components (front camera, speakers, home button, etc.) into it, and it seemed to work fine. I even did one more test run before I closed the screen to make sure all of the cables were connected well, and it worked perfectly. When I closed the screen, however, a bright spot had appeared in the top right quarter of the phone....
Chosen Solution Well got this refurbish unit. Initially it flickers from the top. Usually when i heavily browsing using LTE. Using wifi usually no issues. When flicker, touch screen does not work. I have to cool down the phone by put it infornt of aircond. Once cool (about 1 minutes ++), flickering gone. But touch not working. To enable touch, i need to basically put my finger on the top right front panel, and another finger at the back (near apple logo) and bend it....
Chosen Solution Phone came into the shop yesterday and this could be bad Unit seems to have no power and will not turn on Tested Battery over half charged Plug in charge cable Phone gets slightly warm after about 10mins charge (normal and charging) Changed Screen no change Plugged into itunes itunes sees phone Put on another screen (both new) no change Checked main board no damage to connectors Starting to get worried for this phone, anyone have any ideas ?...
Chosen Solution I got a SE FDHD (I know, not a SE/30, but quite similar. that was basically like a puzzle. It was fully disassembled, I put it together and when I plugged it in and flicked the switch… nothing. So, I decided to put it away somewhere for a while then one day, I decided to take it out again and try it with one of my known good SE/30 boards (because all SE logic boards work with each other) and it actually worked....
Chosen Solution Hi y’all, Just got the latest Mac mini and I need to add an external power button to it with long wires so I can turn it on and off from a distance. In the previous models I was always able to trace back the wires to the pins and splice the cables but with this ultra flat cable now, anyone knows where I need to add my wires?...
Chosen Solution I have a P55W-B5318 and I am looking to replace the SSD….once I get the computer open what am I looking for? Here’s the IFIXIT guide: Toshiba Satellite P55W Hard Drive Replacement But before you sip your current drive out (thats if it’s working), you’ll want to clone your stuff over using a SATA to USB adapter cable like this one: Startech 2.5" SATA to USB adapter
Chosen Solution I had this phone for some time. I lost it 2 years ago and now I found it. The only problem is… When I try to charge it it just gets stuck at 0% and won’t let me past that. I don’t know what is with it. Any help woud be apreciated Hi @mrhidden , After two years of non use and non charging, most probably the battery has become depleted beyond recovery and has failed....
Chosen Solution Iphone 6, replaced the screen, new battery and charge port. Charging fine everything work. Guy comes back next day its stuck on apple logo. He said he let it go completely dead then wanted to charge it back up. If i hold the power and home to restart it goes to apple logo a loading bar starts under it but only goes to less then 1/4, that goes away but still on apple logo....
Chosen Solution Will the T2 chip affect me replacing the battery in Macbook Pro 13” 2019 w/ touchbar? No the T2 chip won’t affect the replacement of the battery. Due to COVID parts are getting delayed! Here’s the iFixit battery you’ll need MacBook Pro 13" Retina (A1989, A2251) Battery and the guide to put it in MacBook Pro 13" Touch Bar 2018 Battery Replacement
Chosen Solution ’'' My Macbook Air, 2017 suddenly started to lag and freeze. The bootup takes over 2 minutes. Youtube wont run on Safari. I ran the the TG Pro test and every sensor seems to Update (10/02/2019) Etre Report Same result after a clean install points to a hardware issue. Being a pretty recent Mac I’d find it strange if it was the battery but one never knows and I’d recommend downloading and installing Coconut battery and post a couple of screenshot adding them to your original question: Adding images to an existing question Other than that we get into board issues, had an Air for repair not long ago that had a faulty CPU current sensing circuitry giving exactly the same kind of issue....
Chosen Solution A cup of black tea, containing probably 5% skim milk, poured over a side table. Little did I know my white MacBook was sitting under the table and some liquid had dripped on to the closed clam shell. By the time I realized the laptop was under the table and had liquid on it, it was the next day. Observed problems Unit powers on fine and starts boot processAs unit progresses to switch the display in to the native resolution, the screen goes off about 3 seconds after the desktop starts to appear....
Chosen Solution I don’t know what else I need to do. Since the light is working, the problem isn’t your battery. You may need to check the wire connections for the speaker, or replace the speaker altogether. Luckily, we have a guide written to walk you through the process! Check it out here.
Chosen Solution after I burn my videos the dvd player shows a message File Not Supported. what can I do to fix this Hi, What file format are you burning? User manual says it supports all versions of DivX. See link http://www.manualslib.com/manual/203789/… Have you tried that format?
Chosen Solution I have a usb type A to micro b usb cable and it doesn’t fit in the port on a ps4 slim. It looks too big. The console works fine its used the controllers work, does the slim model use a different cable or could it be the ports? Hi Assuming that you are definitely using the right cable it should work Some cables a built with a tolerance For example if it’s half a millimetre too big it’s ok or if it’s half a millimetre too small it’s ok But that’s just a example and not actual information to go off of ,just a example It might seem like it’s not fitting but if you get it in at the perfect spot it should fit ,but if it’s clearly not fitting don’t try it as it may cause damage If you are having absolutely no luck follow this amazing guide to add some photos of it so we can see what’s going on a bit better:-) Adding images to an existing question Hopefully this helps Any questions please ask Thanks:-)
Chosen Solution Conair bonnet hair dryer only 3 months old quit working Suzy Cory, Try another known working outlet. If no go, more then likely has a one year warranty on hair dryer and you may want to consider contacting the manufacturer for repair/replacement/refund. If not you could disassemble the hair dryer and test/check all connections, cord/plug, switch, if fused check, with a DVOM to see if faulty. Below is a guide to disassemble various models that may help....
Chosen Solution Please guys, i can not find the rear camera of my htc desire 709d on any spart part seller, any idea abt the compatibility models, does the desire 816 or others fits on the desire 709d ? Pretty sure I found the same reasonably shady website as @djdannyrock https://www.maxbhi.com/back-camera-for-h… Other than that I’m guessing none of us could find anything else, even if they’re compatible. And none of us are experts on htc....
Chosen Solution After looking at the tutorials tearing down an iPhone 5 SE and installing into a new rear casing I realize it’s very difficult and time consuming. However on eBay I have found rear housing that seems to already have some stuff pre-installed. This is an image of the item I found. Now theres pretty much no information on what exactly is already installed. Anyone know or know of a tutorial on what needs taking out of the iPhone and putting into this casing?...
