Posts

Chosen Solution My tablet is stuck on Samsung galaxy tab 2 10.1 logo I can’t do a reset but I can do a Odin I can’t do a reset because when I hold down the power button and it turned off it will open again stuck on the logo again and if I try it in Odin it goes to the options but factory reset can’t I tried the hold the power button and volume up and remove power button and hold the volume up and it will do the Samsung logo and at the top left there will be a recovery booting its color blue but after that it will go to the Samsung galaxy tab 2 10....

Chosen Solution Hi my superdrive dosent work anymore this is the model HL-DT-ST DVDRW GSA-S10N iFixit carries replacement optical drives for this machine. Whether you have the 1226 or 1260.http://www.ifixit.com/Mac-Parts/MacBook-… See for yourself. I have this same superdrive model number (HL-DT-ST DVDRW GSA-S10N:), but mine is a macbook, not macbook pro. the drive, itself, reads the disk – but the foam padding at the opening of the drive is fraying. the last disk i inserted required some force to go in, then got stuck and couldn’t eject....

Chosen Solution Hi, I bought a Azpen Tablet less than a week ago and started using it and the operating system is not booting. When the tablet turns on the the front screen keeps on rebooting and it prevents me from moving forward to the home screen. How can I fix this problem? Hi, Try a hard reset . Be aware a hard reset will erase all your user data and downloaded apps....

Chosen Solution After one screen break, I watched YouTube at home (I did not know ifix at that time). After a few months after the repair was successful, I felt that the battery could not function properly and replaced it. However, after replacing the battery, I covered the liquid crystal again and a black line appeared, so I assembled again and I heard only the sound and the screen did not turn on....

Chosen Solution the fan of my vbook is so noisy, can i fix it? how? Hi johnconcepcion66, Here you can find video guide to teardown your ultra-book. Clean the fan and heat sink.check the noise of the fan, after cleaning if you feel fan still noise, just replace the fan

Chosen Solution At first my clothing took longer to dry then normal. Now when I open the dryer to put clothing in there is water at the top and bottom of the drum. How do I fix this problem? Update (07/19/2016) Thank you for a quick response!! The water is in the dryer. When I went to use the dryer drum it was covered in water at the top. The bottom had nothing....

Chosen Solution Same thing happened to mine after I hit a big rock. Going to pull it apart tomorrow, hopefully just the sheer pin turns out I broke a chain link. Link says Morse F 12R, looks like people want around $600 for a new chain, going to try to find a single master link that will fit. Jared There is a slip clutch is play here take note of how tight the springs are and is the tension equal on all of them

Chosen Solution Hi. Im looking to get into the micro soldering art. I am currently working as a smartphone repair technician but not on the solder level. Im planning on training myself in micro soldering. my trouble now is that i need to buy some equipment and I dont have the biggest budget. I’ve been scouting the net for some stations but what i’ve found is “Hakko” “jcb” and “weller”. I would like some tips of a decent station thats not too pricy but still gets the job done....

Chosen Solution Hi , so my iphone 6s stopped from charging , i took him to a 3rd part repair and told me the problem was the charging circuit dead. They replaced it with a new one on the motherboard and the iphone was back to charge :D but after that the touch Id and reachability wont work , they didn’t change the home button. A restore didn’t solve the problem and no error in the insertion of a fingerprint just is stay waiting me to put my thumb and nothing is happening also reachability don’t work....

Chosen Solution I have purchased a 1TB 2.5" Hybrid Seagate HDD (ST1000LM014) for my Early-2011 MBP, so I have several questions regarding the replacement of the hard drive by myself: Do I need to purchase a tray for the HDD? Is there any way in which I could replace the hard drive without having to restore the operating system to 10.6.7? I have a 2.5" external case for HDDs and thought of cloning the hard drive before installing it on my laptop....

Chosen Solution How do you install a Radio in a 1979 Mercedes 300D? Do i need to run a wire from the battery to the yellow wire on the aftermarket harness? Do i tie the orange (illumination) wire to the red wire? Also on bypassing the fader answers. Thanks W123 chassis requires additional wiring for backup (memory) power and illumination. The latter can be dimmer controlled or fixed. Power for backup can be connected to hazard warning flasher switch, terminal 30, red with white stripe....

Chosen Solution Can I upgrade ram of 2x 2 gb ram 1067 mhz to 8gb ram 1333 mhz instead of 8gb 1066 mhz. Will there be any problem if a higher bus speed ram is used? If your machine is indeed a MBP 13" Unibody Mid 2010, here’s the specs: *Originally, both the official and actual maximum RAM was 8 GB. However, as confirmed by OWC, if running OS X 10....

Chosen Solution I’ve replaced the original hard drive with a Seagate - Momentus 7200.4 ST9320423AS - Hard drive - 320 GB - internal - 2.5’’ - SATA-300 - 7200 rpm but no hard drive is showing on the screen when I try to install Snow Leopard. Have I made a dreadful mistake and bought an incompatible hard drive? Or am I doing something wrong re. formatting the new hard drive? I’ve put the original HD back in again to check that the laptop is not irretrievably broken, and that still works OK....

Chosen Solution Hey everyone! So I have repaired iPhones since the very first one came out up until the iPhone 5. Currently I have an iPhone 6 that’s in good condition but the home button doesn’t work. I also have another iPhone 6 which the button works great but the screen/lcd is cracked and the body is in bad shape. So to get some experience, my goal is to take out the logic board and home button from the cracked iPhone 6, and put it in the 6 with the bad button....

Chosen Solution i cracked the display to my s7 edge and it still works fine i want to replace just the cracked glass on the screen so im wondering if its possible? Nope, not without the use of expensive machines. If you want to replace your Samsung Galaxy S7 edge screen glass, you’d better know more about how to replace Samsung Galaxy S7 edge glass, here is a guide you can read first: https://blog....

Chosen Solution Hi folks, I got an ip5 with some components knocked off. One ist the DZ101_RF near the battery connector. I inspected the connector area very closely and no further parts are missing. My phone e.g. cant read the gasgauge and restarts permanently. In this forum someone said the DZ101 can cause restarts others say I could leave it off. What is true? 4 components are missing near the Frontcamera connector....

Chosen Solution Hi! Today the screen on mi iMac g5, that was working fine, has went almost totally black. I can hardly see that the system (leopard) is still there, but it looks like if I’ve turned the brightness really down. I tried restarting (with the power button, because I can’t see enough to go to the menu), and restart from the system CD (pressing C) but nothing seems to work....

Chosen Solution Hello all, I got a free note 3, but the screen is badly damaged How can I go about testing, or which things can I check to see if they are loose from a drop (looks like that is why it doesnt turn the screen on anymore) I dont see any water damage or anything. She said the screen used to turn on until she took it to tmobile....

Chosen Solution my iPad when I turned it on. Everything worked normally but maybe 20 seconds to 1 minute later it crashes and makes a flash before the display turns off. But the backlight is still on. I have restored, reinstalled ios 10.2.1 and put it in rice. Yet nothing works. https://youtu.be/Rwh-1ojZuRI here is a video of what actually happens Why did you put it in rice? If your iPad was in contact with water, then you need to have it cleaned asap before it dies completely....

Chosen Solution Tried tightening cable down toward the engine as instructed. Tried adjusting it a little bit either way too. Help! paulagarey, The belt may have fell off or may have broke, engagement lever may be loose or tensioner pulley may have fallen off/loose, gear damage in gear box, wheel gear teeth or drive gear damaged/worn, loose/bad input shaft,cable stretched/broke/disengaged. Some of these mower’s carried a 4 year warranty I believe, perhaps see if yours is still warrantied and have repaired under warranty if it is....