Chosen Solution Siri won’t stop talking, I have to double click to get into icons, and I can’t scroll down it just happened. your phone has voiceover turn on. it for blind people. touch 1 time to hear what your tapping. touch 2 times to choose. go to Settings > General > Accessibility. voiceover off! that’s it Thanks this was my problem I was fixing to factory reset it too
Chosen Solution Melts plastic tip at end of plug and also metal completely off, that’s with the de-fouler attachment on. Within week have to keep changing plug. Only doing on 1 plug out of the 4. Just changed wires and its also melting very end of wire up,the end that connects with plug. What the most obvious things i can do or check that may cause this?? Cheapest ways to fix?...
Chosen Solution speedometer works when it wants RPM gauge works just fine. could the wires on the sensor be loose? Where is the sensor located? 1995 Honda Accord 5 speed thank you Best bet is to replace the speed sensor . You need to remove the air cleaner and look down on the back side of the motor where the motor meets the gearbox . Under the distributer and the water hoses on the gearbox http://breebamboo....
Chosen Solution I’ve tried using a TarDisk to upgrade my storage on my Early 2014 MBA 13" but it froze my computer frequently. So I’m faced with the reality that my best option is to buy a new computer OR attempt to buy an OEM 256gb SSD used. I’ve been browsing ebay and there are just so many variables with different manufacturers and part numbers. For instance; http://www.ebay.com/itm/Apple-OEM-SSD-25… Seems like it’s compatible and would fit, but I just can’t be sure....
Chosen Solution My 2019 MacBook Pro with Thunderbolt has stopped charging all of a sudden. I was using one port with my charger, one port with my monitor. The laptop lid was open. There has been no drops or water damage. The monitor still worked, but I quickly realized my MBP was not charging. At first, I thought it could be the thunderbolt ports themselves, but then I realized that the external monitor was working....
Chosen Solution Tablet has a pink bach ground screen, I have already reset to factory settings and it didn’t fix the problem. What can I do to fix this problem? This is generally a failing display or digitizer, Replace it. Here’s how to do it: https://www.youtube.com/watch?v=7N9--kUh… Sometimes the graphics cable gets dislodged Prise open the back Black flat cable to the right Check line on the cable lines up with board line A wiggle and a push helps the cable in Put some tape across connector to prevent further dislodgement Hope this helps Paul...
Chosen Solution Does anybody have any idea on how to disassemble this mouse? I’d like to replace the switches inside of it, but I can’t seem to find any screw holes, even under the feet of the mouse. The M280 has a single screw below the battery. It is covered by a black sticker somewhere in between the + and - signs. I scratched the area with my nail and a circular area appeared indicating a screw hole....
Chosen Solution This radio runs on 9vdc. Would like to power with 12vdc in my rig by adding a jack to this unit. I went ahead and tested (hooked up) 12vdc to battery terminals and unit works….but for how long?? Do I need to limit current and voltage with a resistor or?? Thanks in advance. I wouldn’t run it on 12v, either. What you need is voltage conversion. A series resistor will only work for a given current, and the current drain of the device could be variable....
Chosen Solution XBOX 360 S Problem: Powers on to a green light on console and PSU. After 5-10 seconds console light turns from green to red and does not do the green outer ring lights at all. PSU light remains green. No HDMI signal to monitor. APU fan spins normally. I have tried: Cleaning vents (It wasn’t really dusty) Removing HDD Removing optical drive reseating APU heatsink and fresh thermal paste....
Chosen Solution Hello, I have a Lenovo Yoga 700-14ISK with a cracked screen. I have ordered the replacement glass, thinking this would be an easy heat/pull/replace operation. However, that is not seeming to be the case. When I heat the glass, all the rubber and plastic around it become too soft to pull the glass off without damaging it. Does anyone know of a walk-through on replacing this glass? I’ve only found the 13" version, and that is a totally different screen....
Chosen Solution touch screen was working before repair. Did the repair and now the touch screen will not work. On that cases there is possible region that below in my experience.iPhone 6s plus have one connector for Lcd,touch and 3d touch. 1- connector pin must be broken. 2- Parts near connector might be open or broken. 3- If the phone is on and insert Lcd makes some parts burnt or damage....
Chosen Solution Hey guys, I’m aware that since my cpu and memory is soldered to the logic board, that I personally can’t swap out memory sticks to upgrade my ram for example. However, is it possible to purchase a new logic board with 16GB of ram (I currently have 8GB ram) instead of buying a whole new macbook pro? Thank you Problem might be finding the logic board in the market since it’s a relatively new model, but the replacement can be done, besides specs shape is the same....
Chosen Solution I’ve recently acquired a free Xbox 360 S from a yard sale, yay! Powers on and everything just fine. However, apparently the previous owner had a baby, and the baby knocked it off the shelf while the DVD drive was open. As a result, this thing’s missing the DVD tray! I think the previous owner managed to completely (and cleanly) remove the DVD tray without any left over mechanical stuff hanging out....
Chosen Solution I have a Richmond 12E50-DEC 50 gallon water heater which has digital controls in which after powering off/on with the circuit breaker can be set to heat, but oly powers the upper electric element fo around 1 minute, then the digital control disables the voltage to the heater element. Lower element never gets voltage applied. Both elements are both 11.5 ohms and appear to be good. Am attempting to remove and measure the thermocouple but using the digital diagnostic, I observe lower on at 54 F and upper at 77F, so are somewhat reasonable values for a tank that was at room temperature and then had some water come in from the well into the lower chamber....
Chosen Solution I am notified of incoming calls and texts via vibration. Can’t seem to turn the vibration off, while I can’t get the ringtones to work. When choosing which ringtone to use for which service, a sample will play. I did drop the phone… lol it seem you need to turn off the silent mode using the slider on the upper left part of the phone just on top the volume Bottons if that didn’t work its probably stuck with dirt try prying the dirt out with “DRY “soft tooth brush or tiny broom that should fix it cheers
Chosen Solution Hi all, from reading a bazillion posts, fixes, possible causes I’m exhausted! My issue hasn’t been exactly described by anyone so far so I’m HOPEFUL my answer will come here… BACKGROUND STUFF THAT BOTHERS ME My iMac was recently transported over 600klms & handled by courier/depot/courier although it was pretty well protected. Once it arrived, before I could use it I had to get a tech to get in and get me going after it was sitting unused for 3 years due to locking myself out but having a MacBook Pro on hand I just moved onto that rather than coughing up to get it sorted at that time....
Chosen Solution Replaced the battery and the screen was acting jumpy. I reopened the case and the film on the backside of the screen was stuck to the battery. Is this the problem and if so, how do I fix? The film is now bunched together and I cannot unbunch it. What do you mean film on the back of the screen. There should only be a metal
Chosen Solution ifiit.com a very helpful website and has given me the confidence to purchase and install a new battery. However, from the information provided I’m not able to positively identify that I’m selecting the correct battery for my device. Any help with ensuring that I select the right batter would be appreciated. Mine is a macbookpro5,5 and I think the right battery is the MacBook Pro 13" Unibody Battery, product IF163-019-1....
Chosen Solution Hello, I would like to install an SSD on my macbook pro 17 of 2011 but when I plug it and I boot on my usb key with EL Captain, it does not detect me the SSD. Cordialement Please give us some history of the machine. Were you having any issues before you replaced the hard drive. Also have you have any other issues that might be related to this recall: https://www....
Chosen Solution When I turn on my Galaxy tab 2 10.1 it boots to the logo then goes to the “SAMSUNG” screen, then it stays there. I’ve tried to do a hard reset by holding down the power button and the volume up button and have done both reboot and wipe data and still gets hung on the “SAMSUNG” logo. What else can I do to fix this? Before reading below there is a common issue with these tablets where they do not turn on properly or get stuck on the charging battery icon....
