Chosen Solution Right button have no action, even when make a “click” sound. I removed the cover a check the switch mechansim but still the same problem. Any suggestion to fix this. Thanks.. Jose Guisao I gues you mean the shoulder button. maaaaany dsl/dsi have this problem - it’s most of the time dirt i would try to fix it as shown on youtube - like this one: CLICK BUT never use water for that - use isopropyl alcohol - but never water
Chosen Solution Hello, i’ll appreciated if any one can tell me that what is function of Midfram (Housing) antennas, i have marked on attached picture, it have three antennas, top let, top right & bottom left, please tell me each side antenna have what function, Thanks. Top left antenna is for Wi-Fi, top right is main cellular 4G / 3G. Bottom left is GPS.
Chosen Solution I have a Sceptre 32inch LCD TV which after being turned on shows the Sceptre logo on the screen and then turns blue stating no signal on the screen. The tv does not have sound or picture. I was wondering if it was the power supply or the mainboard which is causing the problem. The model is X-322BV-HD. Hi, The power supply must be working as the logo and blue screen and message are appearing....
Chosen Solution My sons screen is cracked only on the top half of screen, the picture is fine all I need to replace is the “touch panel”, looked on Google and can not seem to find a replacement for the screen? Hi, Found this but it may not be the right one as I cannot find the model number of your tablet. http://www.ebay.com/itm/New-Touch-Screen…
Chosen Solution Hi, i do motherboard repair about half of year but i still have big problem with solder PMIC. Always when i try solder PMIC i always become short, phone do not want boot and PMIC or processor goes really hot. So my question is: Need i special thermal curve or thermal profile for solder PMIC? I have professional BGA repair machine with top and bottom heater but i am not able solder PMIC perfectly....
Chosen Solution When I was watching a show, I noticed that half of the screen looked kind of comic book-y and odd. I exited the window and the screen flashed to black for a second and I noticed that the bottom half of my screen had a green tinge. I could see a few horizontal lines running through it too. Now when I watch the show, I see flashes of purple and red and other colors that shouldn’t be there....
Chosen Solution Hi everyone, I am in the process of doing my first screen replacement on a Surface Pro 4 I’ve got the screen off and disconnected all the cables without an issue following the guide here but I accidentally snapped one of the WiFi antennas during the screen removal. The only website I can find for the part is :- http://www.powerbookmedic.com/Microsoft-… However they are out of stock Anybody know another place I can get one?...
Chosen Solution 1999 Volkswagen Jetta, got a starter relay, took out the panel below the dash but, can’t figure out where it goes. Dawn, 1999 Jetta neutral position switch or the starter interlock relay is up under the dashboard on a panel full of relays, may have to remove the lower dash trim. Should see it through the gap between the fuse panel and the dashboard. Jetta equipped with manual transmission, the relay position is third from the left on the upper row and auto transmission equipped, the relay is third from the right on the bottom row....
Chosen Solution clunking noise from tires when wheel is turned all the way going forward and backwards joe, start by checking the tire for any bulging, uneven thread etc. Next check your CV drive axle for excessive play. It does sound like that is where the noise is coming from.
Chosen Solution I tried to remove the T5 screw holding the SSD down, and it got stripped instead. I tried several different approaches to remove it: larger screwdriver, Philips screwdriver, higher quality screwdriver, micro screw extractor kit (those did not look like reversible drill bits, so maybe i need to look for something else?), and superglue… nothing worked. I’ve read people recommending Dremel to cut a slit so a flat-head would fit....
Chosen Solution Hi, I have an old iPhone XS stuck in the Apple logo boot loop, I’ve tried restoring and updating through iTunes but this continued to show error code 4013, I’ve tried a different lead and computer like it states on the Apple website, I’ve even tried third party on ‘iMyFone’ and still no luck in getting it to restore Did you try the restore through recovery or dfu? I’d try dfu and see if it works that way....
Chosen Solution I have a faulty return key that seems to get stuck with the lightest touch. I would like to either remove the key to see what the issue is, or replace the keyboard assembly. check out this free guide to see if it can help..it’s pretty easy to either clean the keyboard of any gunk or replace the keyboard assembly. no work middel row alphabet is not working...
Chosen Solution I have just replaced the logic board on my MBP after the previous one failed. I had it diagnosed at an authorise apple repair centre who confirmed this was the issue. Rather than pay the high price for them to fix I have opted to do it myself using a second hand logic board. I have installed the board using the iFixIt instructions and all seemed fine, the machine powers up and runs correctly....
Chosen Solution Hello, I have a 27" iMac (late 2012) with an i7 and Apple’s Fusion Drive system. The iMac came with a 128GB SSD drive and a 3TB HDD. We are replacing the Apple HDD that came with the computer with the same Seagate HDD model number but it is not purchased from Apple. Its Seagate ST3000DM001 Barracuda 3TB 7200 RPM 64MB cache SATA 6.0Gb/s 3.5 Are there issues with using the exact same HDD, not purchased from Apple?...
Chosen Solution So i dropped my phone. And its broken, when i turn it on it just make a small signal and turns off. I want to repair the phone by myself. Do i need to change the whole display or can i just change the screen? Or do i need to repair it another way? @sebbialsvik going by your description I advise that you change the complete display assembly. Easiest of all the other options even so it is not an easy task in general....
Chosen Solution Hey, so I have an issue with a Samsung tv un55ru7100fxza. It has this clicking sound and it’s in a cycle of turning off and on, you can see the startup logo for just a second before it turns off and on again. Almost every video I’ve seen so far talks about checking for bulging/ leaking capacitors but all the capacitors look fine and the solder joints on the back aren’t cracked or darkened....
Chosen Solution The screen on my Note3 cracked by itself without being dropped or mishandled in any way. Has anybody else experienced this? It can happen if pressure is applied to the screen in the places that the structure doesn’t like.
Chosen Solution Just last night I uninstalled the display drivers from my AMD Acer E15 E522G84AK and during uninstall it shut down with an error VIDEO DXGKRNL FATAL ERROR. That restarted my laptop and then I was getting a purple screen on boot up and then it started to flash black and purple. It has been like that ever since.. What should I do..I am already panicking.. I just bought it a 2 weeks ago....
Chosen Solution Somehow the sim fell out while trying to install sd now it is stuck and wont come out Hi, All you can do is to open the phone and try to get the SIM card out from the card reader somehow. Here’s the ifixit Orbic Wonder Battery Replacement guide, which will help as it shows how to open the phone so that the card reader is accessible etc. Be careful when handling the phone and disconnect the battery as soon as it is accessible, to minimize any potential electrical problems when trying to remove the SIM card etc....
Chosen Solution Hi to all. I bought from a friend a broken MacBook Pro 13" mid 2010 2.66GHz . The fan ran at full speed and it took too much time to get started. So I unplugged the cable that connects the motherboard with the wifi card, bluetooth and iSight camera and now the Mac works well, without wifi, BT and iSight. I repaired the fuse near the wifi cable connector which had broken out for this problem....
