Posts

Chosen Solution i have no idea how this happened, as i have only had this ipod nano for around 2 months and it looks like its melted or something and its extremely fuzzy yes, that yellowish bit on the right is actually on the screen and not background light charges fine, no touchscreen issues, nothing really other than the screen looking fuzzy and yellow in that one corner. Hi The distortions on the screen looks to be some form of condensation and the yellowing looks to be something wrong with the polariser layer of the screen These issues can be fixed by replacing the LCD using this guide iPod Nano 7th Generation Display Replacement Also here’s a link to the part you will need https://www....

Chosen Solution i have an iPhone 7 32gb that no longer comes on after the screen started coming off but i still hear vibrations and sounds. nekoflyy this sounds like a bad display assembly. Replace the screen then re-evaluate iPhone 7 Screen Replacement

Chosen Solution Stefano Mine are U9E While Apple considers this Vintage the Apple Depot repaired this MacBook 6 months ago including replacement of the Top case and Ribbon Cables. Fore details go to No boot chime, no image on LCD, no image on external display I just want to make sure that I understand you correctly. The brown Top Case to Logic Board Ribbon Cable in your link looks exactly like the one in my MacBook....

Chosen Solution I have an iPhone 7 plus that I was working on for fun and I got the issues all fixed… broken cameras, no service, and damaged rear housing. However, I have an issue with the the sim card now. The issue is that there is a small piece that goes in between the logic board and the iPhone rear casing. On my phone, that piece is missing. It is a black metal/plastic piece....

Chosen Solution Hello, A headphone tip broke off in my audioport, and after reading terrible advice on some forums I tried the superglue idea to remove the tip.. Resulted in my port being glued together. Long story short, I found a company who thought it would fix my internal speakers if the audio port was removed from the Logic Board. Guess what, it didn’t. It seems impossible to get a replacement part for the audiojack as well....

Chosen Solution Hello, My Kenmore front loader washing machine started taking atleast 10-12 minutes extra during spin cycle. During this cycle, some times it makes loud sound like tuk-tuk tuk-tuk. Though there is no water at the end of cycle ( even before it adds time to its spjn cycle) in the drum but clothes are not that dry as they used to be. When machine was empty, I tried to rotate the drum manually and it rotates normally with no noticeable noise in the drum but it sounded like there was a lose part inside....

Chosen Solution Hi, I currently have an Early 2015 Macbook Pro w Retina Display (3.1GHz i7) with a 512GB SSD HD but need to upgrade my memory to at least 1TB. Is this possible and does anyone know which SSD’s are specifically compatible? Cheers, J Here’s the solution offered by OWC https://eshop.macsales.com/item/OWC/S3DA… If you don’t have an external back up, use this solution with the Envoy enclosure: https://eshop.macsales.com/item/OWC/S3DA…

Chosen Solution I got a iPhone 1st generation that is in perfect working order but the screen is cracked and some of the pixels are bad. I ordered a new LCD screen kit for it but cannot seem to find a step by step guide pertaining to how to install it. Does anyone know of any? Also how hard is this task? iPhone 1st Generation Display Assembly Replacement Very difficult

Chosen Solution when i turn it on all it does is show a screen with a file on it that has a question mark in it. Dont think its the drivers because there is no clicking noise. sounds like its booting up but just stays on that screen. Felicia Haze, the ? over a folder indicates that no valid bootable system was found. This could mean that your HDD has failed, or that your filesystem developed errors....

Chosen Solution How do I reattach a ceramic knife to it’s handle Depends mostly how is attached. Most knifes are built like swords were, and in fact they are small swords, so there’s an hilt and a tang/shank that usually fits in the hilt/handle. I don’t know what’s exactly your knife, but check if there’s still a recognizable shank and the handle isn’t too much damaged. If there is, you could find an atoxic adhesive and simply fix it....

Chosen Solution I keep pushing on the touch screen but nothing moves? What should I do? The most likely problem is a loose connection on the inside. Check the connections of the ribbons on the inside of the device. Follow the motherboard removal guide to get to the ribbons. If this doesn’t work, the digitizer may need to be replaced. However, a guide is currently not available for that. To replace the digitizer, one would follow steps similar to the screen replacement guide, but put the components in a new digitizer....

Chosen Solution I have a Toshiba model 37AV50U when I try to turn it on nothing no red light nothing please help Hi @nos7114 , Have you checked that the wall power outlet is working? Try plugging in a hair dryer etc and see if that works OK or not. If the TV is connected to a powerboard (powerstrip?) try plugging it directly into the wall outlet and see if this works....

Chosen Solution Hello, I have a water damaged iPhone 5s from tea in a thermal flask in a ladys hand bag.. Upon removing/replacing the battery it is super super stuck from the adhesive and now the sugary tea cocktail to go along with it. I have ripped the battery open a bit, i noticed this potent glue type of smell and feared maybe it was the battery however it could also just be the adhesive?...

Chosen Solution Hi everyone, so today I put together my first PC and was very surprised to see that I put it all together right the first time around. Now I am stuck on getting the windows 10 installer to work. I can get to the bios and select the usb drive but it ends up just saying “reboot and select proper boot device” some things to note are that I downloaded the windows 10 installer from a Mac idk if that affects anything cause I followed the steps online, but also I’m not sure what settings I have to change if any in the bios in order to get it started....

Chosen Solution Hey Andrew have you tried your computer with the disk that came with it? The reason I ask is because the Majority of times I get the error you are having on my clients computers I reinstall the system and that usually fixes the problem. I have also seen them fix themselves after running Apples Disk Utility. First take out all the added RAM. Use only the original and make sure they’re in the proper paired slots....

Chosen Solution I bought a replacement third brake light for my 2008 Mazda 5. How do I get the old one out off the housing to put the new one in? I unscrewed the bolts and took the plug out. @banditgeneral4 for those you replace the complete light. Lift the tailgate, remove the cover behind the brake light, unscrew and unplug the brake light. Check the connector since they have a tendency to get rusty....

Chosen Solution Was having issues with phone charging. Would have to wiggle the cable around until I found a spot that would charge and if I move the cable it would disconnect. So I replaced the connector, the audio jack works and speaker works though nothing happens now when I try to charge. Also replaced the battery at the same time. Hard to say. Likely one of these parts is not working....

Chosen Solution I have an ipod touch 4G and all the pins on the dock connector on it have either been bent or missing. I wish to replace it but i’m strugguling to find any guides. Does it require soldering or something? Hey Guys, just see here you can solve your Ipod Touch dock port problem. http://ifixor.wordpress.com/2013/01/01/a… Lots of soldering. Two anchors and then it looks like each of those bent pins you mention have a corresponding solder joint....

Chosen Solution I had replaced the screen and all the assembly to screen now when I connected the connector the screen works but as I go to clip the screen in and finish the entrapment the screen doesn’t work Check the cables for bad spots look closely at areas where the cable folds to go back into the case . also look for pinch marks where it might be pinched off by the case also make sure all the black insulation is in the right spots

Chosen Solution I need replacement screws for the bottom of my Mid 2009 Macbook Pro 13". Do you sell these? Here’s the whole set of screws: MacBook Pro 13" Unibody (A1278 Mid 2009-Mid 2010) Screw Set Here’s the three long ones: https://www.usedmac.com/products/922-866… Here are five short ones: http://www.welovemacs.com/9228972.html Here’s a pack of eight short ones: http://www.welovemacs.com/9229903.html